Finding your suitable readers for zwave range extender is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for zwave range extender including detail information and customer reviews. Let’s find out which is your favorite one.
582 reviews analysed
1. Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack
Feature
- [Zwave Extender] Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus.
- [Zwave Repeater] Z-Wave repeater amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices.
- Z-Wave extender. Plug in to 110 volt wall socket. Small design so it does not block other outlets
- Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more.
- Z-Wave Plus certified. Certification number: ZC10-16095239
2. Aeotec Range Extender 7, Z-Wave Plus Repeater, Zwave Extender, Gen7, 700 Series, V2, with SmartStart and S2, Compatible with SmartThings, White
Feature
- WIRELESS Z-WAVE SIGNAL REPEATER: Amplifies and repeats weak signals. Boost the wireless range up to 250% and raise the reliability of weak Z-Wave / Z-Wave Plus devices.
- 50% FASTER Z-WAVE COMMUNICATION: Built upon Aeotec unique Gen7 hardware and firmware stack, Range Extender 7 communicates with other Z-Wave devices up to 50% faster than other repeater models.
- S2 COMPATIBLE: Security focussed, Range Extender 7 can repeat and amplify Security 2 (S2) compatible Z-Wave communication used by door locks, alarm systems, and other secure devices.
- EASY AS PLUG AND PLAY: Plug it in (its small design means it doesn’t block other sockets) and then connect it to your Z-Wave gateway using Range Extender 7’s SmartStart QR code. It’s Aeotec simplest installation yet.
- Compatible with all Z-Wave gateways including ISY994i, Homeseer HS3, Vera, SmartThings, Wink, Hubitat, Domoticz, Jeedom, Open-zwave. Built upon Aeotec’s Gen7 technology. Z-Wave Plus V2 and 700 series certified. Certification number: ZC12-19080007.
3. Aeotec Range Extender 6, Z-Wave Plus repeater
Feature
- Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus.
- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices.
- Plug in to 110 volt wall socket. Small design so it does not block other outlets
- Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera.
- Z-Wave Plus certified. Certification number: ZC10-16095239
Description
You use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec’s Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it’s custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating; it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492 feet away when unobstructed. Range Extender 6 is compatible with all certified Z-Wave gateways including Samsung SmartThings, Fibaro, and Mios Vera.
4. GE Enbrighten Z-Wave Plus Smart Plug, 1 Grounded Outlet, On/Off Switch for Lighting & Appliances, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings Wink and Alexa, 28169, White
Feature
- Wirelessly schedule and control any lamp or small appliance from anywhere, at any time with any mobile device.
- Up to 50% improved wireless range, 250% faster processor, 400% more memory and energy efficiency over Z-Wave Classic products.
- Space-efficient design does not block second outlet or obstruct furniture placement.
- Requires a Z-Wave certified gateway, providing remote access from any mobile device.
- Compatible with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, Home Seer, Smart Security, Harmony, Vera, Connect and Iris.
Description
Wirelessly schedule and control any lamp or small appliance from anywhere, at any time with any mobile device.
5. Honeywell Z-Wave Plus Smart On/Off Light and Appliance Switch, Dual Outlet Plug-In, 2 Controlled Together | Repeater Range Extender| ZWave Hub Required – SmartThings, Wink, and Alexa Compatible, 39342
Feature
- WIRELESSLY CONTROL & SCHEDULE LIGHTS & OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote.
- 2 SIMULTANEOUSLY CONTROLLED GROUNDED OUTLETS – features 2 grounded outlets that can be controlled at the same time (NOT SEPERATLEY) and a manual ON/OFF & program physical button. Works with all LED, CFL, halogen and incandescent bulbs and other devices.
- REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT.
- ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
- EASY SETUP – simply plug the module into any in-wall outlet, then connect your lights or devices to the smart outlets located on the side of the plug-in (one outlet on left and right side). Space saving design will leave the bottom outlet free to use when plugged into the top outlet.
6. GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Compatible with Alexa, SmartThings, Wink, Zwave Hub Required, ON/OFF Control, Repeater/Range Extender, 3-Way Ready, 46201
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
7. GE Enbrighten Z-Wave Plus Smart Dimmer Toggle Light Switch, Full Dimming, in-Wall, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings Wink & Alexa, 14295
Feature
- “ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately).
- Wirelessly schedule, control and adjust the brightness of any dimmable lights from anywhere
- Works with dimmable LED, CFL, halogen and incandescent bulbs, and other devices.
- Requires in-wall installation with hard-wired connections – Neutral wire is REQUIRED (wall plate not included)
Description
Transform any home into a smart home with the in-wall GE Z-Wave plus wireless smart lighting control smart dimmer toggle switch. The dimmer allows you to wirelessly Schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day. Helping to cut energy costs and keep your home safe, it requires in-wall installation with hardwired connections for full control from smartphones, tablets, pcs and Z-Wave enabled wireless remotes. Take control of your home lighting with GE Z-Wave smart lighting controls. Range up to 150ft. line of sight between the Wireless Controller and the closest Z-Wave receiver module.
8. Linksys AC1200 Dual-Band Wi-Fi Range Extender / Wi-Fi Booster (RE6350)
Feature
- AC1200 Linksys Range Extender eliminates Wi-Fi dead zone and boosts the Wi-Fi signal from your existing router, increasing the strength and coverage of your home Wi-Fi
- Easy setup with Push Button Connect. Works with all Wi-Fi routers or ISP-supplied gateways. Expand Wi-Fi coverage up to 7,500 square feet
- Expands coverage for optimal HD streaming, gaming, and more. With Spot Finder Technology, you can also use your smartphone, laptop, or tablet to make sure you’ve chosen the best location for the range extender
- With its slim design and compact footprint, the AC1200 Wi-Fi Range Extender plugs into the wall and power strips without blocking other outlets. Its sleek white finish and minimalist design blend seamlessly with a variety of décor styles
- Requirements are existing 802.11 a/b/g/n/ac wireless router or access point, windows, mac computer, or tablet with wi-fi capability and ac power outlet. Browser requirements are internet explorer 8 or higher, safari 5.1 for mac or higher, google chrome 25.0 or higher and firefox 20 or higher
Description
Eliminate dead zones and Boost Wi-Fi from your router with the Linksys AC1200 Wi-Fi range extender (RE6350). with AC1200 Wi-Fi speeds (N300 + AC867 Mbps), households will enjoy fast, uninterrupted Wi-Fi indoors and Outside it features spor Finder technology and WPS for simple setup and optimal placement in relation to your router. It works with all Wi-Fi routers, including those from service providers, to deliver uninterrupted streaming, online gaming, and seamless content sharing.
9. Honeywell Z-Wave Plus On/Off Smart Light Switch, In-Wall Paddle, Interchangeable White & Almond |Built-In Repeater & Range Extender | ZWave Hub Required – SmartThings, Wink, Alexa Compatible, 39348
Feature
- WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES– Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Schedule timed events for connected devices and customize scenes for day or night, home or away – Switch can also be operated manually
- REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT.
- ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). CANNOT connect directly with ECHO PLUS or other Alexa products (Only ZigBee products can connect directly to Echo Plus).
- IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing switch in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and other devices.
- INCLUDES CHANGEABLE PADDLE COLORS – includes white and light almond paddles to match any home décor. Features a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT INCLUDED.
Conclusion
By our suggestions above, we hope that you can found Zwave Range Extender for you.Please don’t forget to share your experience by comment in this post. Thank you!
