540 reviews analysed
1. Camco 02202/02203 2000W 120V Screw-In Water Heater Element – High Watt Density
2. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
3. Stanbroil Replacement Part Electric Smoker and Grill Heating Element with Adjustable Thermostat Cord Controller
Feature
- Made from premium materials, this heating element was designed to last.
- 1500W, 110V Heating Element with adjustable mounting bracket and element support feet.
- The heating element and matching adjustable controller allows you to adjust the temperature from approximately 50 F up to 450 F.
- The heating element can easy mount flange which requires a rectangular opening in the side of your grill or smoker.
- Built in Controller Heating On indicator light.
4. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
5. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
6. Unifit 120V AC 15A Electric Smoker/Grill Analog Temperature Controller Heating Element Replacement Kits up to 1750 Watts (2)
Feature
- Fits Smoke Hollow,Masterbuilt,Char Broil,Cuisinart analog control electric smokers
- 120V AC 15A temperature controller with 14 AWG power cord
- Temperature adjusting range from 100F to 550F,depends on your appliance size
- 120V AC 1650 Watts high heat efficiency heating element
- UL certified heat element and CSA certified controller
Description
Universal analog temperature controller with 1650 Watts heating element kit set fits most electric smoker and electric grill in the market: Smoke Hollow, Masterbuilt, Char Broil, Cuisinart
7. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
8. NEW Replacement ELECTRIC SMOKER BBQ GRILL HEATING ELEMENT ADJUSTABLE THERMOSTAT CORD CONTROLLER
Description
The matching heating controller and element are designed for the Barbecue Enthusiast who is designing and building their own electric smoker or grill and looking for an easy to use and install electric heating system. The controller and element can be added to many existing large smokers and grills if you’re to incorporate in a separate food warmer area. The heating element and matching adjustable controller allows you to adjust the temperature from approximately 50 F up to 450 F, depending on size, construction and materials used in the smoker or grill. The heating element features an easy mount flange which requires a rectangular opening in the side of your grill or smoker of 2 5/8” by 1” for the removable controller attachment flange. The element mounting bracket allows for adjustable bolt mounting from 2 ¾” to 3 ½” on center and can be attached with user supplied bolts and nuts. The heavy duty 1500 watt element uses standard US 110 volts and come with 2” tall stabilizing supports for the ends of the element. The controller easily can be unplugged from the heating element for cleaning and storage and features an easy to adjust dial thermostat with a heating on indicator light. The controller is UL listed and has a heavy duty yet flexible 52” power cord for safe use of your grill or smoker year round. Features: 1500 watt, 110 US volt Heating Element with adjustable mounting bracket and element support feet Adjustable UL Listed 110 volt Controller (Approx. 50F to 450F depending on size, material and construction of the smoker or grill) Built in Controller Heating On indicator light 52” heavy duty flexible controller power cord Mounting Requirements/Specifications: Heating Element (not includ
9. Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit
Feature
- ????????There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
- ????????Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
- ????????By setting the temperature set-point and the difference between the temperature set-point and the difference.
- ????????Alarm when temperature is out of limit or sensor is wrong.
- ????????Switch between refrigeration and heating modes, temperature calibration.
10. Inkbird Dual Stage Temperature Controller + NTC Sensor, AC 100V – AC 240V. (ITC-308S + 1.97" NTC Probe)
Feature
- ????????[Convenient Design] Support °F/ °C display. Easy to set, PV and SV dual display windows.
- ????????[Dual Relay Output] You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
- ????????[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- ????????[Waterproof Sensor] The temperature controller sensor is stainless and waterproof IP68.
- ????????[Alarm for Safe] Alarm when over-temperature and sensor error. Maximum output load: 1200W(110V).
Description
Features:
– Plug and play design, easy to use.
– Support reading with Centigrade or Fahrenheit unit.
– Temperature calibration.
– Compressor delay protection for refrigeration control.
– High and low temperature alarms are available.
– Over-temperature and sensor fault alarm.
– Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.
Specification:
Temperature Control Range : -50~99°C / -58~210 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308S Temperature Controller
1x 1.97″ Female to Male NTC Sensor
1x Manual
Conclusion
By our suggestions above, we hope that you can found Water Heating Element And Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
