Top 10 Water Cooling Reservoir 525 Bay

Alphacool Repack reservoirs are built with budget in mind; simple, high quality reservoirs that get the job done right every time. With many different types of material available, like Plexi and White Delrin, there is sure to be a repack reservoir that fits your build. Repack reservoirs come with all of the stop caps needed to function properly, as well as an attractive faceplate that displays water level for easy refilling. Many users have used repack bay reservoirs for years with great results, but reservoirs are also offered in tube and other configurations. The possibilities are endless with Alphacool Repack reservoirs!

Model: 15171

Alphacool Repack reservoirs are built with budget in mind; simple, high quality reservoirs that get the job done right every time. With many different types of material available, like Plexi and White Delrin, there is sure to be a repack reservoir that fits your build. Repack reservoirs come with all of the stop caps needed to function properly, as well as an attractive faceplate that displays water level for easy refilling. Many users have used repack bay reservoirs for years with great results, but reservoirs are also offered in tube and other configurations. The possibilities are endless with Alphacool Repack reservoirs!

Model: 15040

New EK-DBAY Spin Reservoir (R3.0) is an updated reservoir of the Dual Bay Res Spin family. It features white flow indicator which shows the liquid is actually circling in the system. Liquid is flowing through the impeller on to the waterfall on the front acrylic cover into the reservoir. The reservoir is made of quality POM Acetal material with fresh looking, acrylic top. Front of the reservoir is aesthetically improved with quality brushed black anodized aluminum bezel. Both sides of the unit feature rubber anti-vibration mounting nuts. On top of the reservoir is one G3/8″ threaded port with enclosed corresponding plug to easily fill the reservoir with cooling liquid. Backside of the unit features four G1/4″ threaded ports. One is indicated as an inlet port, while other three can be used as outlet ports. Two G1/4″ plugs are enclosed to close the remaining open ports after you determine the tube positioning. No water can evaporate from it which makes the annoying refilling unnecessary. The reservoir can be installed into an empty dual 5.25″ drive bay slot. No boring or sawing is necessary.

Model: 3831109840849

The step towards perfection The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. A lot of details complement the first impression! Two 1/4″ holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4″ holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4″ threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle. Technical data: material: plastic and metal color: black measurements (LxDxH): 148 x 118 x 84,5mm connector thread: 10x 1/4″ lighting: 2x 5mm LED Scope of delivery: 1x Alphacool Eisfach mounting material Please note: The container is being delivered without a pump. Please order one seperately or together with this on as a set! Download 3D-file (.stp)

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released previously. Compared to EK-Multioption RES X2 product line the EK-RES X3 reservoirs feature improved inlet/outlet port configuration for easier and more straightforward fitting configuration and tube routing. Improvements have been made on the reservoir’s bottom terminal which has been optimized for best flow. Vortex occurrence has also been diminished by the use of enclosed anti-cyclone as well as additional PE foam. All these new features result in easier-than-ever mounting, filling and quickest bleeding of air. Reservoir is manufactured of premium quality 60mm acrylic tube and POM Acetal end caps. The sealing is performed by quality EPDM rubber washers. New RES X3 comes with a pair of EK design reservoir holders using adjustable fastening force controlled by enclosed Allen key.

Model: 3831109841020

Alphacool Repack – Laing DDC – 5,25 Bay Station, perfect for the Laing DDC (without threads), here as the single pump version! Pump top and reservoir in one offers many advantages: Easy mounting, compact dimensions and optically appealing design! All these features are implemented into the new Alphacool Repack at the highest level. But Alphacool would not be Alphacool, if this new product would not also have some extremely interesting new features, which were not available until now! Designed for installation in a vacant 5.25” drive bay, this reservoir allows compact installation and is a great addition to the front of your enclosure. Connection to the reservoir can be achieved via the implemented ¼” threads for maximum compatibility and flexibility. Construction-wise, this reservoir is also a great piece of hardware: Extra-strong Plexi increases stability of the reservoir and ensures extra rigidity. Filling can be done via the 3/8” thread in the front third of the reservoir, which is sealed with a black nickel plated screw plug during operation. By simply pulling the reservoir forward from the drive bay, it can be filled easily. Make it even easier for yourself by connecting a Fillport! Installation of the reservoir is done just like mounting on an optical drive, making it quick and easy for any user!

Model: 15165

The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. Two 1/4″ holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4″ holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4″ threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle.

Model: 13287

Bitspower Water TanK Z-Multi Ultra 250 Reservoir. Includes Z-CAP with G1/4″ x 1, Z-Tube 250 x1, Tank Clamp Set x1, G1/4″ Silver Shining Stop Fitting x3.

Model: BP-WTZMU250P-CLBK

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. Precision machined from aluminum, this 12mm tall reservoir mount allows you to mount your reservoir perpendicular, 60 degrees left, or 60 degrees right. It features a color matched load spreader bar to help minimize point loading on your case panel. Color matched stainless fasteners are socket head cap screws and include a hex wrench. Indents allow for mounting our Dual Bulb CCFL lights. Also available in a 25mm tall “standard” version and a 50mm tall “High Boy” version (sold separately).

Model: MMRS-MT-SAP-MB

Barrow Water Tank Inline Reservoir

Model: YPH65-135 V2