814 reviews analysed
1. XpertMatic MH-2000 Digital Temperature Controller AC 110V-220V 10A, Freezer Thermostat Outlet Switch with Heating and Cooling Mode, for Aquarium, Greenhouse, Fermentation, Heater, Brewing, Incubator
Feature
- [Easy to Use] Plug and play, simple to program.
- [Easy Switching Between Dual Modes] Supports heating and cooling modes. Can Be Easily switched. Suitable for ac relay cooling and heating devices such as chest freezer, slow cooker, portable air conditioner, small space heater, heating lamp, etc.
- [Dual Display Windows] Simultaneous displays measured temperature and the set temperature at the same time. It has a wide temperature control range from -40℉ to 212℉.
- [Safe Use] With a compressor delay function, it helps to protect your refrigeration and heating equipment. Max output load is 2200W (220V, 10A).
- [Wide Range Of Uses] Can be used for home brewing, fermentation, breeding, making kombucha, and incubation. Widely used in the greenhouse, fermentation chamber, grow room, garage, reptile terrarium, aquarium, etc.
Description
XpertMatic MH-2000 is an accurate digital temperature controller with a wide temperature control range from -40℉ to 212℉.
The temperature controller is able to connect with various heating/cooling equipment, and then work as a temperature control system.
Widely used in homebrewing, fermentation, breeding, making kombucha, and incubation, accelerating germination, etc.
A great digital temperature controller for multiple uses!
Delay Protection
The power-on delay feature design to protect the value and in cases the on/off cycle occurs rapidly.
All-in-one Design
1 Socket for 2 temperature control modes. Designs in a compact size for convenient use.
Accurate Controller
The temperature measurement accuracy is ±0.3℉. You can keep the environment in your desired temperature range.
Specifications:
Working Voltage Range: AC 90V-250V ±10%，50/60Hz；
Relay Capacity: 10A/AC 220V; Power Consumption: ≤3W
Standby Power Consumption: ≤0.5W
Temperature Control Range: -40℉~212℉
Temperature Measurement Accuracy : ±0.3℉
Temperature Control Precision: 0.1℉
Slewing Range : 0.1℉~50℉(Adjustable) ; Temperature Resolution: 0.1℉
Temperature Sensor: NTC 77℉=10K B3435土1%(4.9ft )
Power Cable Length: 4.9ft
Working Environment Temperature: -30℉~150℉,
Humidity: 90%RH; (No Condensate)
Dimension: 6.1*2.4*1.1 in(L*W*H)
Package Includes:
1 x MH-2000 Temperature Controller
1 x User Manual
2. Cdmall Electronic Fan Speed Controller Variable Adjuster for Hydroponics Inline Duct Exhaust Ceiling Fans with 6" Long 120V 15A Cord
Feature
- ONE SWITCH, 3 SETTINGS: Variable, Off, and Full
- MULTI-FUNCTIONAL: Makes it easy to adjust the speed of your inline fans and duct fans
- SAFE OPERATION: Built-in grounded plug for safe operation with all inline fans
- SPECIFICATIONS: Voltage/Frequency:120V/60HZ Max. Amperage:15A
- WHAT’S INCLUDED: Fan Speed Controller with 6 ft Grounded Power Cord (US standard plug)
Description
One control switch for 3 settings: Variable Speed, OFF, and Full Speed
3. uniquegoods AC 220V 10000W High Power SCR Motor Speed Controller Voltage Regulator Dimming Attemperation Thermoregulation Board
Feature
- Maximum Power: 10000W (5000W can be used at room temperature for a long time)
- Dimensions: 130 * 60 * 47mm (5.12″x2.36″x1.85″)
- Voltage Regulation: AC 10V to 220V (Adjust begin 20V)
- Application: Electric furnace, water heater, the lamps and lanterns that move light, small motor, solder iron temperature control
- Military level double circuit board design
4. uniquegoods AC 50-220V 2000W(max) 25A SCR Constant Voltage AC Motor Speed Controller LED Dimmers
Feature
- Input supply voltage: 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage <
- = Input supply voltage)
- Item size: 1.85*1.38*1 inches
- Net weight: 1.76 ounces
- The maximum output power: 2000W
- The maximum output current :25A
- Operation environment temperature:-20’C-40’C
- High efficiency,high torque,low heat generating
5. Variable Fan Speed Controller
Feature
- QUALITY DESIGN: If you are looking for a quality speed controller for your fan, look no further! Using a hard plastic shell and metal mounting clip, enjoy the accessibility of fitting this in your grow area. The rheostat dial allows ease of use and simplicity when choosing what fan speed control setting you like. With a 3 -prong grounded export plug, this controller is ready for use with almost all household plug types.
- MULTIPLE SPEEDS: Never get stuck with a one speed setting on your fans ever again! With variable settings at low, medium and high you can easily modulate your fan speed depending on the size of your room.
- SAFETY AND PROTECTION: When it comes to your grow, your safety and protection is of the upmost importance. Featuring an easily removable fuse, this device is protected in the event of power surges and item malfunction.
- WIDE VARIETY OF APPLICATIONS: If you do not have a grow tent, do not fret as this controller can be applied to many situations. These can include but are not limited to
- greenhouses, kitchens, bathrooms, grow rooms, and many other HVAC set ups. So whether you need controller for your indoor or outdoor ventilation system, this item is for you.
- INCLUDED COMPONENTS: 1x Yield Lab Variable Fan Speed Controller
6. HBN Outdoor Indoor Wireless Remote Control 3-Prong Outlet Weatherproof Heavy Duty 15 A Compact 1 Remote 3 Outlets with Remote 6-inch Cord 100ft Range ETL Listed (Battery Included)
Feature
- READY-TO-GO: Each HBN Wireless Remote Control Outlet kit contains everything you need to start (even the remote batteries!). Simply plug and play, or sync up the outlets to suit your needs.
- WEATHERPROOF: Our plug is built to stand the test of rain and harsh weathers. Please place the plug as least 2 feet off the ground with the plug pointing straight down to avoid water damage.
- FLEXIBILITY: Sync remote outlets together regardless of frequency differences, and expand your system with any of our HBN Remote Control Outlet kits.
- SIMPLE CONVENIENCE: Use the remote or the outlets themselves to turn your appliances on and off. Great with almost any electronic device, including lights, air conditioners, heaters, audio sound systems, holiday decorations, and charging devices.
- SAFE AND RELIABLE: Outlets will remain off after a power outage to save energy and protect your appliances. Ratings: 125V, 15A/1875W Resistive, 5A/625W Tungsten, 1/2HP
7. Senninger Pressure Regulator 25 PSI 3/4 Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve – Landscape Grade High Performance
Feature
- Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation.
- This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 – 7 GPM (114 – 1590 L/hr).
- 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
- Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4″ outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
- Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
Description
Every system experiences pressure fluctuations resulting in unwanted flow deviations and over or under-watering. In nursery, home & commercial landscape watering systems, pressures can fluctuate when zones cycle on or off or due to elevation changes in the irrigation system. A water pressure regulator works like an automatic valve to limit higher pressure to a desired constant lower pressure. It is important to maintain the correct operating pressure for optimum droplet size and radius of throw. Regulation is also imperative to properly meter application of fertilizers & herbicides through the irrigation system. Despite being an essential part of any drip system, pressure regulators are often not included in drip irrigation kits. Pair with backflow preventer and keep extra handy for irrigation repair, replacement parts, or expansion.
Attributes:
100% water tested for accuracy
Can be installed above or below ground
No external metal parts for excellent corrosion resistance
Maximum flow path resists plugging
Very low hysteresis & friction loss
Preset Operating Pressure: 25 PSI (1.72 bar)
Maximum Inlet Pressure: 105 psi (7.24 bar)
Flow Range: 0.5 – 7 GPM (114 – 1590 L/hr)
Inlet Size: ¾” Female hose thread / Outlet Size: ¾” Male hose thread
Applications: Drip Line, Low Volume, Nursery, Greenhouse, Solid Set, Pivots & Linear Systems
Model #: PRLG-25 / Product #: PRLG253FH3MH
Length: 3.1 inches / Width: 1.6 inches
Note: If you measure PSI of this Pressure Regulator with a Pressure Gauge, please note “End cap” style gauges do not measure accurately because they block flow of water when screwed onto the end of the regulator. The spring inside the regulator only activates when water is actively flowing through it. For accurate results, use a gauge that allows water to flow unblocked through the regulator while measuring.
8. Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers
Feature
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances
- It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect.
- The motor speed controller can easily provide a continuous current to your DC motor or other DC load.
- Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller.
- Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the “wiring diagram”
- Turn on the power, and adjust the potentiometer.
Description
Features:
This controller uses novel bi-directional high-power SCR.
It can be very convenient adjust the current up to 25A, and solve the over current problem of the heating wire resistance is too small in the case of cooling causing good.
The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect.
Specification:
Input supply voltage: 110V- 250V AC
The output voltage:50V-250V (Output voltage less than or equal to Input supply voltage)
The maximum output power: 2000W
The maximum output current :25A
The voltage regulating range:50V-250V AC (Output voltage less than or equal to Input supply voltage)
The operation environment temperature:-20C-40C
Package:
1 x Motor Speed Controller
9. BINZET DC12V 5A 60 Watt LED Power Supply Driver Transformer AC to DC Output Voltage Convertor LED Strip Low Voltage Powered LED Light Regulator
Feature
- Input Voltage 90 -250 Volt, Power 60 Wattage
- Output Voltage 12V DC
- Power supply for low-voltage led lights such as LED strip light, led string light
- Constant DC voltage or current to operate optimally, easily adapt to different power supplies, have longer standby power, and are safer
- Can convert incoming AC power to the proper DC voltage and regulate the current that flows through the LED during operation
10. FIBARO RGBW Controller Z-Wave LED Strips Regulator, FGRGBWM-441, doesn’t work with HomeKit
Feature
- TRUE CUSTOM LIGHTING: Control 3 or 4-channel RGBW LED strips to paint your home with unique light scenes. Illuminate your kitchen cabinets, backyard, or any space with 3 million colors, including a white light channel for everyday lighting. Monitor and control your LED strip directly from your smartphone (Z-Wave system required, sold separately. Works with Alexa only with compatible Z-Wave hub)!
- ENDLESS OPTIONS: With 4 0-10 V analog inputs for light, wind, pressure sensors, and more, create one-of-a-kind rules to best fit your needs. Automate lighting based on the temperature in a room (think illuminated heated floors!) or attach a soil humidity sensor to the RGBW Controller for a perfectly watered lawn every time. Monitor the energy usage of each connected device live or over time for a more efficient smart home (your Z-Wave hub needs to support energy monitoring to use this feature).
- HUB REQUIRED: This controller will work best with Fibaro Home Center Lite, a truly private and powerful Z-Wave hub. The device will work great with any open or DIY Z-Wave system like SmartThings, Vera, Hubitat, HomeSeer, or Wink. Use these systems to control the RGBW controller with Alexa. It is not supported by Z-Wave alarm panels (Ring, ADT Pulse, Vivint, Alarm.com and others). This is a Z-Wave device, and it’s not supported by Apple HomeKit.
- FLEXIBLE SET-UP: Just wire it up using the intuitive manual, put your Z-Wave system into inclusion mode, and power up the module – it will be added to the network automatically. The controller supports LED, RGB, and RGBW strips as well as halogen lights powered by 12-24 VDC.
- YOU’RE COVERED: This RGBW Controller is built in Europe using only high-quality components. It is Z-Wave Plus certified and UL-listed. Support portal and documentation are available on the Fibaro website so if you ever need help, just ask!
Description
The FIBARO RGBW Controller is a universal, Z Wave compatible RGB/RGBW controller. The RGBW Controller uses a PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. Additionally, the device supports up to four 0V 10V analog sensors such as temperature sensors, humidity sensors, wind sensors, air quality sensors, and light sensors. All IN and OUT terminals may be user configured for LED control or 0V 10V signal readouts.
The RGBW Controller allows you to manage and monitor energy consumption connected to the LED strips. Four channels allow for total or independent measurements of energy consumption. When connected with the Home Center 2 you can check the live realtime power consumption and review usage history.
You can upgrade the device wirelessly using the Home Center 2 any time new firmware is available.You don’t have to disconnect it from a wall socket and waste valuable time connecting it to a computer. Just press the update button and enjoy the comfort of your home
WARNING: Fibaro RGBW Controller is dedicated to operate in low voltage circuits of 12VDC or 24VDC. Connecting higher voltage load may result in Fibaro RGBW Controller damage. Fibaro RGBW Controller must be powered by the same voltage as the connected light source. I.e. if controlling 12V LED strip, the module must be connected to 12V power supply. Similarly, if controlling 24V RGBW strip, Fibaro RGBW Controller must be powered by 24V voltage supply.
Conclusion
By our suggestions above, we hope that you can found Vacuum Regulator Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
