Top 10 Plywood Bolts Hurricane

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.

Product Description

The Simpson Strong Tie Strong-Drive SDS Screw is a 1/4-inch diameter high-strength structural wood skew ideal for various connector installations as well as wood-to-wood applications. Patented 4-CUT point (coated version) and type-17 point (stainless version) enable easy driving with no pre-drilling and minimal splitting. Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization. A low-speed 1/2-inch drill with a 3/8-inch hex driver is the recommended tool for installation.

From the Manufacturer

The Simpson Strong Tie Strong-Drive SDS Screw is a 1/4-inch diameter high-strength structural wood scew ideal for various connector installations as well as wood-to-wood applications. Patented 4-CUT point (coated version) and type-17 point (stainless version) enable easy driving with no pre-drilling and minimal splitting. Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization. A low-speed 1/2-inch drill with a 3/8-inch hex driver is the recommended tool for installation.

Power Pro Premium Exterior Wood Screws are perfect for decking and all other exterior wood projects. These screws feature a no-strip star drive, countersinking blades, no split twist shank, and no pre-drill, Borefast thread. Power Pro Premium Exterior Wood Screws include a limited lifetime guarantee against rust and corrosion. Recommended for use with treated lumber.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.

We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

Product Description

Galvanized Dual Torq Deck Screws are the perfect screws for your decking and all other outdoor projects. Specially engineered for harsh weather conditions, these mechanically galvanized screws provide excellent corrosion resistance. Designed as a phillips drive with a square at its center, these Dual-Torq screws give you more driving options. While Galvanized Dual Torq Deck Screws are fantastic for pressure treated woods, the finish may cause staining in cedar or redwood.

From the Manufacturer

Galvanized Deck screws are specialized fasteners designed to resist corrosion in adverse outdoor environmental conditions. They are the preferred fastener for pressure treated lumber. Not recommended for cedar or redwood.

Beautify your Leathercrafts!

Our high quality Chicago screws are a great addition to any leather garment or accessory. Easily applied with standard screwdriver. Used by saddle makers and leathercrafters everywhere.
This lot contains 25 tops and 25 screws; plain design; steel with nickel (silver) finish. Size 1/4″, our most popular size.