733 reviews analysed
1. Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
Feature
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
Description
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
2. Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
Feature
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
Description
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
3. Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
Feature
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
4. Ninja Pro Extractor Blades Assembly for BL642 Blender DUO with Auto-iQ Replacement ( 7 Fin )
Description
Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
5. Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)
Feature
- ♠ Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- ♠Ninja Replacement Blade –7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- ♠Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
- ♠Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- ♠Note2: Be careful of the blade when open the package
Description
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
*This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
*Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
6. NutriBullet Replacement Extractor Blade – Premium NutriBullet Replacement Parts & Accessories (Pack of 2)
Feature
- Replacement for NutriBullet Extractor Blade with Gasket. Fits Nutribullet Pro 900 and 600W Only. Does NOT fit Nutribullet Lean, RX, Magic Bullet or Ninja blenders.
- STAINLESS STEEL: This blade is made of stainless steel and will NOT need sharpening!
- DISHWASHER SAFE: High quality plastic and stainless steel that is 100% safe for dishwasher.
- PERFECT SEAL: Includes rubber gasket pre-installed in base for complete seal with cup
- We make no claims that these are original NutriBullet products but they work just like the original.
Description
High-Quality: Made from high quality molded plastic Nutribullet blade blender base with stainless steel blades.
Compatibilety: Compatible with all NutriBullet Original (600 watts) & NutriBullet Pro (900 watts) blender accessories.
NOT Compatible: This blender cup WILL NOT WORK with NutriBullet Lean (1200 watts), NutriBullet RX (1700 watts) blenders, Magic Bullet or Ninja blenders.
Dishwasher Safe: It is made from high-quality plastic that is 100 safe for the dishwasher.
Percect Seal: It has a rubber gasket built in for a perfect seal with NutriBullet cups every time with no leaking.
Easy Handling:The threads are smoothed to make for easy on and easy off attachment of accessories.
We make no claims that these are original NutriBullet products but they work just like the original. We are not associated with Homeland Housewares LLC.
7. AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
Feature
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
8. CloudCUP Replacement Blades for Blender, Blades Replacement & 3 Extra Gaskets, Extractor Blade Replacement, Blade Parts Compatible with Nutribullet Pro 900/600 Series (Pack of 2)
Feature
- 【PACKAGE INCLUDE】: 2 Pcs Replacement Blades with pre-installed Seal Ring Gaskets and 3 Pcs Extra Seal Ring Gaskets as a gift
- 【PERFECT FIT】: Compatible with Nutribullet Pro 900W and Nutribullet 600W Only. DO NOT FIT Nutribullet Lean, RX, Magic Bullet or Ninja blenders.
- 【PREMIUM QUALITY】: Made of stainless steel
- 【PERFECT SEAL】: Includes seal ring gasket pre-installed in base for complete seal with cup
- We make no claims that these are original part but they work just like the original. For any reason you’re not completely satisfied, ask for a replacement or FULL REFUND, NO QUESTIONS ASKED.
Description
CloudCUP Replacement Blades for Blender, Blades Replacement & 3 Extra Gaskets, Extractor Blade Replacement, Blade Parts Compatible with Nutribullet Pro 900/600 Series (Pack of 2)
9. NutriBullet Extractor Blade NBM-BA028AMZ.60 Lbs, Grey
Description
Need a blade replacement? This smooth operator’s got power, blending your smoothies, dips, snacks and dressings to a silky consistency, every time. Works with the original NutriBullet.
10. Replacement Extractor Blade, Compatible with NutriBullet 600w and 900w Blender Models Replacement Parts
Feature
- LEAKING OR NOISY: If your Nutribullet getting louder than before, or leaking when it works, it means that you need a new replacement extractor parts
- COMPATIBILITY: The replacement extractor blade for Nutribullet Pro 900W and 600W Only. Does not fit Nutribullet Lean, RX, Magic Bullet or Ninja blenders.Please check your blender model before purchasing.
- High-Quality Materials: The replacement blade is made of food-grade BPA Free plastic and stainless steel, not rubber material, brings qualified anti-corrosion performance. Perfect choose for chopping, grating and blending.
- DISHWASHER SAFE: High quality plastic and stainless steel that is 100% safe for dishwasher. Threads are smoothed for easy on and easy off.
- PERFECT SEAL: Gasket replacement is pre-installed in this nutribullet accessories parts set, you can use the blade without any operation. 【We make no claims that these are original NutriBullet products.】
Description
Product Specification:
Item Type: Blender Replacement Parts for NutriBullet
Size: Tall 1.61 inches X Diam 4.02 inches
Gear Threaded: Positive Threaded
Material: Food Grade Plastic and Stainless Steel
Blade Shape: Cross Blade
Color: Grey
Package Includes: 1 x Replacement Extractor Cross Blades
Compatible with all NutriBullet Original (600 watts) & NutriBullet Pro (900 watts) blender accessories.
NOT Compatible: This blender cup WILL NOT WORK with NutriBullet Lean (1200 watts), NutriBullet RX (1700 watts) blenders, Magic Bullet or Ninja blenders. Please check your blender model before purchasing.
Features:
All Nutribullet Replacement Parts are High Quality with Certificated and BPA free.
It is made from high-quality plastic that is 100 safe for the dishwasher.
The threads are smoothed to make for easy on and easy off attachment of accessories.
Perfect for those who like to enjoy fruit smoothies and beverages at every meal.
This product not’s a Nutribullet original product, but they work just like the original.
Any use of the Nutribullet brand name,model or part designation for this product is made solely for purposes of demonstrating compatibility.
Conclusion
By our suggestions above, we hope that you can found Original Ninja Pro Extyractor Blade for you.Please don’t forget to share your experience by comment in this post. Thank you!