Top 9 Ninja Personal Blender Blade

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70

DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30

Fit more fruits and veggies in your daily routine with the Ninja Fit. The 700-watt power pod sits under the blender and makes short work of frozen or soft ingredients to make nutrient-rich super juices and healthy meals. The Nutrient and Vitamin Extraction process blends your ingredient so thoroughly you get all of the nutrients, instead of throwing some parts away. This package includes: 700-watt power pod, 2 16-ounce Nutri Ninja cups, 2 sip and seal lids, Nutri Ninja blade, 50 recipe cookbook, and instruction book. Starting a new diet and eating healthy doesn’t have to be hard. Use the Nutri Fit to make meals you won’t regret.

Color:Blade 7 Fins

Description:

Item Type: Ninja Blender Replacement Parts for blender

Blade material: stainless steel

Blade shape: Cross blade

＊This Ninja Blender Accessories Suit for:

BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

＊Not fit for :

BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

NOTE:

Two conditions must be met at the same time before purchase:

1: Your original motor base must be 7 fins;

2: Your blender model must identity with our stated model.

The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:

There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.

Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.

Pay attention to before use :

Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.

Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)

Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.

Place the replacement blade onto the cup and screw it tightly until you have a good seal.

Please make sure it in right place and locked tightly.

Do not run your blender over 4 minutes at a time to prevent overheating of the blender.

Packing including:

1 x Ninja blade Replacement

Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.

Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)

If you have any problem about your order, please feel free to contact us.

– Item Name: Nutri Ninja Blender Blade Replacement (7 Fins)

– Blade Material: BPA + Stainless Steel

– Diameter:3.94″/10cm

– Blade shape:Cross blade

– Color:Black-7 fins

Packing Including:

1 xNinja blade Replacement

1x Gasket Rubber

 NOTE:

Two conditions must be met at the same time before purchase:

★Your original motor base must be 7 fins;

★Your blender model must identity with our stated model.

The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:

There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.

Pay attention to before use :

1. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.

2. Please check the rubber gasket and be sure it is put snugly into the bottom blade.

(The rubber gasket is used to avoiding a leak)

3. Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.

4. Place the replacement blade onto the cup and screw it tightly until you have a good seal.

5. Please make sure it in right place and locked tightly.

Do not run your blender over 4 minutes at a time to prevent overheating of the blender.