878 reviews analysed
1. ACDelco 213-4514 Professional Engine Coolant Temperature Sensor
Description
An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is the high quality replacement ideal for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.
2. Pyle Hydra Marine Amplifier – Upgraded Elite Series 400 Watt 4 Channel Audio Amplifier – Waterproof, Dual MOSFET Power Supply, GAIN Level Controls, RCA Stereo Input & LED Indicator (PLMRA400)
Feature
- PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA400 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units.
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle’s electrical system from short circuit conditions.
- POWERFUL 400 WATT: This amplifier is powerful with its 100 WATT x 4 max or 400 WATT and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 1-300mV and 4 or 8 Ohm speaker impedance.
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
Description
Product Description
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool – it’s completely waterproof. This 4-channel, 400-watt marine amp takes both high and low level inputs, so it’s compatible with a variety of head units and sources. Remote turn/on off makes controlling this amp a breeze. Gold plated RCA inputs means this amp won’t be a weak link in your setup. For protection, count on the heavy duty aluminum alloy heatsink to prevent overheating, as well as thermal, overload, and short circuit protection. Comes complete with mounting screws and hardware. Runs on 12 volts DC.
Amazon.com
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool–it’s completely waterproof. This 4-channel, 400-watt marine amp takes both high- and low-level inputs, so it’s compatible with a variety of head units and sources. Remote turn/on off makes controlling the amp a breeze, and gold-plated RCA inputs mean it won’t be a weak link in your setup.
Input Options
The PLMRA400 features low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.
Input Level Control
Adjust the line level input for the least amount of distortion to match your source unit.
Protection
Protect the amp and your vehicle’s electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. A heavy duty aluminum alloy heatsink helps prevent any thermal issues.
4 or 8 Ohm Speaker Impedance
The PLMRA400 is ready for either 4- or 8-ohm speakers, in pair.
Remote Turn-On/Off
Wire the PLMRA400 to turn on and off in tandem with your receiver/head unit.
Pyle PLMRA400 Select Specifications
| Power Rating: | 100 Watts x 4 Maximum |
| Power Supply Voltage: | 14.4V DC Neg. Ground (10.5-16V) |
| Frequency Response: | 15 Hz-30 KHz |
| Input Impedance: | Low Level: 10K Ohms High Level: 100 Ohms |
| Input Sensitivity: | Low Level: 250mV High Level: 2.5V |
| Dimensions: | 7.87 x 2 x 8 Inches (L x W x H) |
| Weight: | 3.3 lbs. |
What’s in the Box
Pyle PLMRA400 Amplifier, Mounting Hardware, User’s Manual
3. Pyle Hydra Marine Amplifier – Upgraded Elite Series 1000 Watt 4 Channel Bridgeable Amp Tri-Mode Configurable, Waterproof,MOSFET Power Supply, GAIN Level Controls and RCA Stereo Input(PLMRA420)
Feature
- 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters.
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level inputs.
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle’s electrical system from short circuit conditions.
- POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance.
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
- Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
- Variable high- and low-pass filters with crossover mode selector
- High-level MOLEX and gold-plated low-level RCA inputs with adjustable input level
- Overload, Short Circuit, and Thermal protection with LED indicator
- Variable bass boost of up to 18dB at 60Hz
Description
Product Description
Dual variable high/low electronic crossover & bass boost. Power on LED indicator. LED protection indicator. Blue LED level display. Tri-mode configurable. Dim: 2.7″H x 12″W x 10.9″D. 4 channel. 1,000W. 250W x 4 @ 4_. The Waterproof Marine Bridgeable MOSFET amplifiers extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. The PLMRA420 features 4 channels and 1000 watts of power.
Amazon.com
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool–it’s completely waterproof. This four-channel, 1000-watt bridgeable marine amp takes both high- and low-level inputs, so it’s compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. A blue LED level display lets you keep an eye on your signal, and for protection, you can count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
Input Options
The PLMRA420 features gold-plated low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level MOLEX inputs.
Input Level Control
Adjust the line level input for the least amount of distortion to match your source unit.
Bass Boost
Add a little low-end boost with selectable bass boost of up to approximately 18dB at 60Hz.
High- and Low-Pass Filters
Optimize the output to match your speakers exactly, using the variable high-pass and low-pass frequency controls.
Crossover Mode Selector
Route the output of the low-pass or high-pass filters or the full signal to the internal power amplifier, or the full range if preferred.
Protection
Protect the amp and your vehicle’s electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. LED lights indicate if the amp has gone into a protection mode. Finally, an anti-thump turn-on feature protects your speakers during power-up.
Pyle PLMRA420 Select Specifications
| Power Rating: | 250 Watts x 4 Maximum Output at 4 ohms 35 Watts x 4 RMS at 4 ohms 50 Watts x 4 RMS at 2 ohms |
| T.H.D: | <> |
| S/N Ratio: | > 95dB |
| Power Supply Voltage: | 14.4V DC Neg. Ground (10.5-16V) |
| Frequency Response: | 15 Hz-30 KHz |
| Input Impedance: | Low Level: 10K Ohms High Level: 100 Ohms |
| Input Sensitivity: | Low Level: 250mV High Level: 2.5V |
| Dimensions: | 10.9 x 2.7 x 12 Inches (L x W x H) |
What’s in the Box
Pyle PLMRA420 Amplifier, Mounting Hardware, User’s Manual
4. Gates 28090 Pre-Heat Duct Hose
Description
Heater Duct Hose
5. Dr.Roc Replacement for Toyota Lexus 90467-10183 90467-07201 90467-10188 52161-02020, Bumper Fender Liner Grill Trim Panel Retainer Fasteners Rivets Clips with Fastener Remover
Feature
- Replacement forScion/Lexus / Toyota90467-10183(Fits for Quarter Panel Trim Panel Clips) and Pontiac/Scion#88970767(Fits for Fender Liner Clips)—1/4″(7mm) Hole
- Head Diameter: 23/32″(18mm)
- Stem Length: 9/32″(7.5mm)—15PCS
- Replacement for Lexus / Toyota 90467-07201—Fits for Fender Liner/Bumper/Radiator Support Air Deflector/Trunk Trim Panel Clip/Deck Lid Trim/Wheel Arch Molding/Quarter Panel Splash Shield/Spoiler Clip/Grille Retainers—9/32″(7mm) Hole
- Head Diameter: 25/32″ (20mm)
- Stem Length: 13/32″(10mm)—20PCS
- Replacement for Toyota 90467-A0005/ Lexus 90467-A0005&90467-10188—Fits for Door Trim Panel/Liftgate Trim/Quarter Panel Trim Panel/Body A-Pillar Trim Panel/Radiator Support Air Deflector/Console Trim Panel Fasteners—5/16″(8.5mm) Hole
- Head Diameter: 23/32″(18mm)
- Stem Length: 9/16″(14mm)—15PCS
- Replacement for Lexus / Toyota # 52161-02020—Fits for Fender Liner/Bumper Retainer Clips —11/32″(9mm) Hole
- Head Diameter: 23/32″(18mm)
- Stem Length:1 3/32″(28mm)—20PCS
- Premium OEM Upgraded Quality Clips with Fastener Remover–Made of superior durable PA66 or POM. It won’t break after years(especially in hot summer and winter). 100% same size as original retainers. Other Names: Bumper Clip, Grille Clip, Fender Clip, Moding Clip, Splash Shield Clip, Trim Clip, Panel Clip, Body Clips, Fender Retainer Clip, Bumper Retainer Clip, Fender Retainer, Body Panel Fasteners, Bumper Fastener, Fender Fastener, Bumper Rivets, Fender Rivets.
Description
●Replacement for Toyota/Lexus 90467-10183 Trim Clips & Pontiac/ Scion 88970767 Fender Liner Clips
Fits for Toyota Avalon 2005-2018;Camry 2007-2018;Celica 2000-2005;Corolla 2003-2018;Matrix 2003-2014;Mirai 2016-2018;Prius 2004-2018;Sequoia 2008-2018;Yaris 2007-2016
Fits for Scion tC 2011-2016;xB 2008-2015
Fits for Lexus IS350 2006-on;GS350 2007-on;GS450h 2007-on; RC350 2015-on; SC430 2002-2010
●Replacement for Toyota/Scion/Lexus 90467-07201 Fender Liner/Bumper/Trim Panel/Splash Shield/Grille Retainers
Fits for Toyota 4Runner 2010-2018;Avalon 2003-2018;Camry 2002-2014;Corolla 2009-2018;Highlander 2001-2018;Prius 2010-2017;RAV4 2006-2018;Sequoia 2008-2018;Sienna 2011-2015;Tacoma 2011-2016;Tundra 2007-2018;Venza 2009-2017;Yaris 2007-2016
Fits for Scion xD 2008-2013
Fits for Lexus CT200h 2011-2017;GX460 2010-on
●Replacement for Toyota/Lexus 90467-10188 & Lexus 90467-A0005 Trim Panel/Radiator Fasteners
Fits for Toyota 4Runner 2003-2018;Avalon 2013-2019;Camry 2002-2018;Land Cruiser 1998-2018;Corolla 1998-2018;FJ Cruiser 2007-2014;Prius 2001-2018;Highlander 2001-2018;RAV4 2001-2018;Sequoia 2001-2018;Sienna 2004-2018;Tacoma 2000-2016;Tundra 2000-2018;Venza 2009-2017;Yaris 2006-2018
Fits for Scion iQ 2012-2015; tC 2005-2016; xB 2008-2015;xD 2008-2014
Fits for Lexus CT200h 2011-2017;GX460 2010-2019;LX470 1998-2007;LX570 2008-2019;SC430 2002-2010
●Replacement for Toyota/Lexus 52161-02020 Fender Liner/Bumper Retainer Clips
Fits for Toyota 4Runner 2003-2018;Avalon 1997-2019;Highlander 2001-2018 Camry 1997-2018;Corolla 1998-2018;Celica 1994-2005; FJ Cruiser 2007-2014; Land Cruiser 1998-2018; Prius 2001-2018;RAV4 2001-2018;MR2 Spyder 2000-2005; Sequoia 2001-2018;Sienna 1998-2018;Tacoma 2000-2018;Tundra 2002-2018;Venza 2009-2017;Yaris 2006-2016
Fits for Scion tC 2005-2016;xB 2004-2015;xD 2008-2014.
Fits for Lexus CT200h 2011-2017;GX460 2010-on;GX470 2003-2009;LX470 1998-2007; LX5702008-on; SC430 2002
6. iSportgo S60 Dash Cam Mirror Mount with 6 Different Joints Kit Suitable for Z-Edge, Old Shark, YI,KDLINKS X1,Falcon Zero F170HD,GoPro Hero and Most Other Dash Cameras
Feature
- S60 with 6 different joints, suitable for most popular brand dash cam, such as Z-Edge/ YI /OldShark/Falcon Zero/G1W, G1W-B, G1W-C, G1W-CB…/HP /Transcend/ TaoTronics……For the corresponding brand and model, please check the picture .
- Ultra-slim 9.70mm design,and Clamping Diameter range:13-42mm(0.5-1.65ft), very easy to install and suit most of car rearview mirrors
- Real 360 degree rotation design, adjust to any angle you want
- Using POM plastics and rubber material and Screw,Net weight: 56g, Bearing weight: up to 10kgs (22Ib)
- Never fall off the windshield like the suction cup holder.
Description
Model No.:S60
Material: POM plastics+Rubber+Screw
Size:115*54*20mm
Net weight: 56g
Bearing weight: ≤10kgs(22Ib)
Temperature Range:-40℃ ～110℃
Clamping Diameter range:13-42mm(0.5-1.65ft)
Accessories:
6pcs Different Joints
1pcs Rubber Pad
1pcs Warranty Card
Widely Applicable models: (Including but not limited to)
YI 2.7″ Smart Dash Cam, Z-edge Z3, Z1, Falcon Zero F170, OldShark 3″
G1W, G1W-B, G1W-C, G1W-CB, G1W-H…LS300W, LS400W, LW360W, LW430W..
Transcend, TaoTronics 2.7″,HP F310, Ausdom, DOD Tech…
Lecmal 2.5″, Btopllc 2.5″, NEXGAGET 3.0″, Aketek 2.5″, KDLINKS DX2, Hisili 3″
SENWOW GS 8000L, Napoer 2.7″,Btopllc, Old Shark, TOGUARD F2.0 ect…
iSportgo is a good brand in outdoor sport product accessories and Car accessories field.
If any problem or you need help, Kindly contact with us , we will solve it for you at once and accept replacement or refund .
7. Alpine MRV-F300 4-Channel Car Amplifier, 50 Watts RMS x 4
Description
75W RMS x 4 (2Ω, 14.4V, ≤1% THD+N) 50W RMS x 4 (4Ω, 14.4V, ≤1% THD+N) Same power in a 40% smaller chassis Evolution to Class D digital platform New snap-on terminal covers for easy installation
8. Auto Ventshade 194727 Smoke in- Channel Vent Visor Window Deflector, 4 pc
Feature
- Check for compatible models before buying the product.
- Installs in window channel for a sleek, streamlined appearance
- Tinted, reinforced acrylic is UV and scratch-resistant and is car wash safe
- Allows fresh air to naturally circulate through open windows while keeping the rain out
- Reduces heat build up in parked vehicles by allowing window to be kept partially open
- Installs in minutes, no drilling or special hardware required
- Please note special instructions for In-Channel Ventvisors on installation guide
- Made in the USA and backed by a limited lifetime warranty
Description
AVS In-Channel Ventvisor Side Window Deflectors are designed to complete the look of your vehicle adding subtle style while maintaining the functionality you desire from a side window deflector. The Ventvisor installs in the window channel for a streamlined appearance, but still allows fresh air to naturally circulate through open windows while keeping the rain and wind out. There is no special hardware needed and no drilling required, the In-Channel’s patented design easily secures into the window channel or along the rubber seal with pre-applied 3M automotive tape. Absolutely no tape touches your vehicle’s finish. Additionally, the product keeps the sun out of your eyes and allows you to keep your window cracked while parked, keeping the interior cooler.
9. Car Retainer Clips Fasteners Cars Body Kits 18 Most Popular Sizes 299 PCS Plastic Car Door Panel Trim Clips Kit 1 Pcs Fastener Remover for BMW Benz Toyota Honda Nissan Subaru Audi Mazda
Feature
- 18 MOST POPULAR SIZES:Our auto push retainer Clips including 18 most popular sizes are suitable for BMW Benz Toyota Honda Nissan Subaru Audi Mazda for exact replacement.(Not fit for 2004 Toyota Sienna inner fender fasteners!!!)Not only for the cars we mention, if the sizes and shape meet your requirement,it also works well.It is can solve your problem very quickly.
- DURABLE MATERIA:The Car Retainer Clips are made of high quality nylon material, which is more strong,robust and resistant, would not break or crack easily.
- ERGONOMIC DESIGN：Our cars body kits auto Push Rivets Clips set adopts ergonomic design with super lightweight，easy handheld features which effectively effort saving for various interior and exterior car trimming in the shortest time.It allows you to quickly and easily remove the door panel trim clips and trim clips without damaging them.
- WIDELY USEFUL:Theses Auto Body Push Clips are widely used for car body clips, trim panel retainer, door trim fastener, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement.Can meet your various needs for BMW Benz Toyota Honda Nissan Subaru Audi Mazda.
- 100% SATISFACTION:If you are not satisfied with our auto body clips sets,please contact us,we will try our best to solve your problem.
Description
Our auto retainer body clips set include 299pcs 18 different kinds auto clips and 1pcs fastener remover tool.you can buy good value for money at a better price.
Specification：
Package Including:299 pcs /set
1 x fastener remover tool
Total 18 diffierent sizes auto body clips
Size: As the picture showed
Color: Black,Blue,Pink
Material:Nylon and Plastic
Note:
Our auto push clips set are more favorable than others’ suits, and the variety is more abundant. Come and buy it!!!
Not fit for 2004 Toyota Sienna inner fender fasteners!!!
Bacause of the differences in computer displays, there may be a slight color difference. Please check the size, type and shape carefully before purchasing!!! To make sure the item is the one that you need.
10. KeylessOption Keyless Entry Remote Control Key Fob Replacement for KOBUTA3T
Description
Replacement keyless entry remote with battery and electronics installed. Easy to follow step by step DIY programming instructions are included with your purchase. Please enter your year, make and model into the parts finder to verify this item is compatible.
Conclusion
By our suggestions above, we hope that you can found Mercury Dash Duct for you.Please don’t forget to share your experience by comment in this post. Thank you!
