Top 10 Liquid Cooling Temp Sensor

Bitspower coolant temperature sensor as a plug fitting.

Model: BP-MBWP-CT

Barrow G1/4″ 10K Temperature Sensor Stop Fitting, Black

Model: TCWD-V1

The Bitspower G1/4 Thread Flow Sensor is a great way to install a safety valve into your looping loop. Just install this flow sensor into your cooling loop and connect the rpm cable on your motherboard CPU fan header. Once installed the flow sensor will send the RPM signal to the mainboard thus allowing you to utilize the BIOS safety settings. These can also be used on fan controllers and other RPM sensing devices as well! Model: BP-FS-CLBKDBR.

Highly precise In-line temperature sensor for almost all G1/4″ threads. The sensor can be integrated at any point in the cooling loop. At the measuring point the wall thickness of the casing is reduced to <1mm and="" the="" sensor="" is="" insulated="" from="" the="" outside="" to="" allow="" maximum="" precision="" and="" quick="" reaction="" of="" the="" measurement.="" due="" to="" its="" inner="" diameter="" of="" 1cm="" this="" sensor="" adds="" no="" restriction="" compared="" to="" fittings="" and="" small="" to="" medium="" sized="" tubing.="" therefore="" this="" sensor="" is="" truly="" ''high-flow="" capable".="" this="" cable="" is="" not="" only="" practical,="" it="" is="" also="" optically="" appealing,="" the="" surrounding="" mesh,="" also="" called="" mesh,="" which="" is="" surrounding="" the="" cable="" itself="" offers="" the="" advantages="" that="" every="" pro-modder="" is="" looking="" for:="" a="" completely="" unique="" look,="" even="" of="" the="" cables="" in="" the="" system!="" special="" attention="" was="" paid="" to="" the="" combination="" of="" cable="" connectors,="" sleeve="" and="" heatshrink="" which="" were="" used="" to="" ensure="" great="" design="" and="" a="" unique="" as="" well="" as="" elegant="">

Model: 71225

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

【Product characteristics/ specifications】bitspower dual/ single D5 top design with reservoir Bitspower Z – multi/ Z – Tube/ Z series only support vertical retention bracket Included RoHS Compliant.

The new temperature sensor from Phobya with g1/4″ inner thread and G1/4″ outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it’s low height of only 11,6mm (without threads) allows it to fit below almost any connector. The sensor cable is equipped with a standard 2-Pin plug. High-Flow, no narrowing of the cooling channel inside of the sensor! Also see example of installation. This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.

Model: 71227

1. Small size and easy to install. 2. Anodized, can accurately display the temperature of the water flow. 3. The display temperature can be accurate to 0.1 °C. 4. The water temperature is displayed instantly, and the data is refreshed in real time. 5. Suitable for general purpose G1/4 threaded interface. Specification:
Applicable accessory type: water cooled
Material: Aluminum
Process: Anode
Pattern: Smooth
Thread: G1/4
Size: approx. 6 * 4 * 3 cm/ 2.4 * 1.6 * 1.2 in
Weight: approx. 96.8 g
Package list:
1 * Temperature Meter

Bitspower coolant temperature sensor as a plug fitting. Model: BP-BSWP-CT.

Specifications:
Monitoring Range: -50 ~110 degrees
Voltage: 5V – 24V
Interface: Big 4P
Screw Thread: G1/4
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Applicable Pipe: 9mm Outer Diameter
Thermometer Panel Size: Approx. 47.8 * 28.2mm
Package Size: Approx. 12 * 9 * 3cm
Weight: 98g
 
Package List:
1 * Water Flow Meter
1 * Thermometer
2 * Connectors
2 * Clamps
 
Note:
●Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
●Product’s size made for manual measurement,  1-2CM error belongs to the normal range.