620 reviews analysed
1. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
2. REFLECTIX EXPO4050 Series 4"x50′ Expansion Joint
Description
4″ x 50′, Black, Foam Expansion Joint, 1/2″ Thick, Stiff Enough To Use On Straight Joints & Flexible Enough To Shape Contours, Resistant To Moisture & Is UV Resistant, Exceeds ASTM Standards D4819 & D3575.
3. DEWALT DW5701 3/8-Inch by 8-Inch by 13-Inch 2 Cutter Spline Shank Rotary Hammer Bit
Feature
- ROCK CARBIDE tip maximizes carbide surface contact for longer bit life
- U-Flute cleans debris out for fast, efficient drilling
- Open head design channels dust into flutes for quicker drilling.
- For use with all brands of spline rotary hammers
- Used for drilling anchor and through holes in poured concrete and other masonry up to 2″ diameter
- ROCK CARBIDE tip maximizes carbide surface contact for longer bit life.
- U-flute cleans debris out for fast, efficient drilling.
- Open head design channels dust into flutes for quicker drilling.
Description
Product Description
115-DW5701 Features: -Rock Carbide tip maximizes carbide surface contact for longer life.-Open head design channels more dust out.-U-flute design maximizes bit strength.-Longer helix increased flute travel expedites dust removal.-Price is for 1 Bit.
From the Manufacturer
DEWALT DW5701 3/8-Inch x 8-Inch x 13-Inch 2 Cutter Spline Shank Rotary Hammer Bit
4. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
5. The Hillman Group 831491 XL Washered Wing Nut 1/4-20 (1 Pack of 100)
Description
Hillman 1/4-20 100 Pc. XL Washered Wing Nut. Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product, to tighten simply turn the nut by hand. This nut has a wing on each side that helps you to tighten the nut without tools. Made of Zinc Die Cast, will not rust or corrode. These nuts have a built in washer. Various sizes available. Includes 1 pack of 100 pieces of wing nut per pack.
6. The Hillman Group 831487 1/4 X 1-Inch Stainless Steel Hurricane Track Bolt, 100-Pack
Description
Product Description
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.
From the Manufacturer
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.
7. Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors & Set Tool – 49 Pieces
Feature
- 1/4″-20 x 1-1/2″ Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel – 24 pieces
- 1/4″-20 Machine Screw Masonry Anchors – 24 Pieces
- Includes Setting Tool for Proper Machine Screw Anchor Installation
- Commonly used for storm windows and shutters to anchor into brick or masonry wall
- Fixtures can be removed or replaced without sacrificing holding power
8. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
9. 15pc Flap Sanding Wheels Kit for Drill, Mounted on 1/4-inch Shank
Feature
- Kit contains 15 pieces of flap sanders that fits on drill or drill press
- Flexable and conform to the shape surface, softer than standard sanders.
- Ideal for the removal of burrs and loose wooden fibers after heavy sanding and shaping
- Ideal for breaking sharp edges on wood (slight rounding)
- Check Description below to see whats included
10. M-jump 12 Pcs 2”X 1” X1/4” Flap Wheels Set –3 pcs Of Each 40 60 80 and 120 Grits Aluminum Oxide for Remove Rust and Weld Burr – 1/4 Shank Fits All Drills
Feature
- 2″X 1″ X1/4″ Flap Wheels Set – 4 Different Sanding Sizes – 1/4 Shank Fits All Drills- 3 pcs of each 40 60 80 and 120 Grits
- HIGH QUALITY: High performance aluminum oxide grain for fast material removal Premium abrasives cloth provides long wheel life
- USE FOR: Wheel can remove paint and sand, grind, level, and strip surfaces and makes quick work of it. These wheels style disks make use easy.
- PACKAGE INCLUDES: All 4 most necessary grits. Diameter: 2″” Height: 1″” Shank diameter: 1/4″” RPM: 20,000 Strips paint from any surface. Quickly shapes and finishes wood. 1/4″” shank fits securely into any power drill chuck. Includes:3pc 40 grit 3pc 60 grit, 3pc 80 grit, and 3pc 120 grit.
- CHECK US OUT: When it comes to purchasing your tools, you have plenty of options. However, a reputable company that cares about you and your project will help you experience a better result.
Conclusion
By our suggestions above, we hope that you can found Hurricane 800W for you.Please don’t forget to share your experience by comment in this post. Thank you!
