839 reviews analysed
1. Replacement Damper Motor Actuator for Honeywell ARD ZD M847D 2 Wire Spring Motor RZ3-1M
- *Torque is consistently delivered throughout the full 90 degree rotational operating range to open and close the damper, and irrespective of whether the actuator is operating in Power Advance Mode (energized) or Spring Return Mode (de-energized).
- *The energized actuator may be stalled at any angular position and remain energized indefinitely.
- *When de-energized, the actuator consistently returns the damper shaft to home position, whether or not the starting spring return position is a full 90 degrees or any intermediate position.
- *Extremely reliable. Statistical life reliability exceeds 120,000 cycles at 90% reliability and 100% confidence with no decay in delivery torque over life of the actuator.
- *Very quiet operation typically 40dB, or less at 3 feet. These motors offer: Less Cost Better Quality Full 1 Year Warranty
2. Honeywell MSTN Switch Terminal Damper Actuators AOBD Replacement Motor
3. Johnson Controls M9102-IGA-3S Series M9102 Non-Spring Return Damper Actuator, M3 Screw Terminal, On-Off Floating Control W/Timeout, 18 Torque, 50/60 Hz, 24VAC
4. Replacement Damper Motor Actuator for Honeywell ARD M847D 2-Wire Spring Return – Trol A Temp, Zonefirst
- 2-Wire Spring Return Actuator 24V with durable gears, and easy to remove black plastic covers.
- Replacement for Honeywell M847D1004, M847D1012, and all Honeywell M847D Series Motors for ARD dampers.
- Replacement for Retrozone Replacement Damper Motor Actuator for Honeywell ARD M847D 2 Wire Spring Motor RZ3-1M 680474058020.
- Zonefirst replacement models ZDS, ZDB, and RTS.
- For use with dampers that are normally open, as used with Honeywell and Trol-a-Temp zone control systems.
Drop-in replacement motor actuator for Honeywell M847D1004, M847D1012, and all Honeywell M847D Series Motors for ARD dampers, RZ3-1M 680474058020. Zonefirst rmodels ZDS, ZDB, and RTS. For normally open, as used with Honeywell and Trol-a-Temp zone control systems. Better than the original motors! Easy to install, quiet solid construction guaranteed.
5. Belimo 24V, 90 Second, 45 in-lb Actuator for ZD, SD, Eb Dampers FP45-Motor
6. Honeywell 40003916-026 24Vac 50/60Hz replacement head for V8043E with end switch
7. Braukmann M847D-VENT Truezone Replacement Actuator – Ventilation (Normally Closed) – For Eard Ventilation Dampers
8. Honeywell M847D motor replacement kit to Belimo 3 wire motor
- Stop replacing those troublesome Honeywell Spring return motors! This Honeywell to Belimo retrofit kit allows you to easily replace the Honeywell M847D motors with the powerful commerical grade Belimo 3 wire motor, complete with the custom adapters and hardware for your damper.
- 5 year factory warranty, satisfaction guaranteed or your money back!
- Works with Round or rectangular dampers, any damper with a 3/8″ or smaller shaft
- Works with any panel, Honeywell and others with a 3 wire damper output
- Also works on many zone panels with a 2 wire damper output
9. 24V Thermostatic Actuator (Zone Valve) 4-wire
10. Honeywell MS8105A1030 Spring Return Actuator Damper Motor, 44# On/Off
By our suggestions above, we hope that you can found Honeywell Damper Actuator M874 for you.Please don’t forget to share your experience by comment in this post. Thank you!