520 reviews analysed
1. Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes
2. Door/Window Permanent Hurricane Anchoring Kit
3. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
4. Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)
Feature
- Low-profile head can remain in place when panels are down
- Hurricane bolts can also be referred to as sidewalk bolts
- These stainless steel, combo-drive sidewalk bolts measure 1/4″ in diameter x 1-1/4″ in length and come in 25 pieces per retail package
- The combo head is Slotted and Phillips. The bolt is 1/4-20 (thread is 20) and the diameter of the head is 3/4″
- Country of Origin: Taiwan
Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
5. Hillman 4277 Diameter #8 Screw Eye (1-5/8" Overall Length | 1/2" Eye Inner Dimension), 10-Pack
Description
Product Description
A screw eye is a bolt with a loop fashioned at the non-threaded end and a lag thread screw on the other. Great for light-duty applications, it is made with steel for strength and is designed to attach cables to surfaces.
From the Manufacturer
A screw eye is a bolt with a loop fashioned at the non-threaded end and a lag thread screw on the other. Great for light-duty applications, it is made with steel for strength and is designed to attach cables to surfaces.
6. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
7. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
8. Muzata Stainless Steel Eye Shape Screws Metal Hook,Wood Terminal Ring Eyelet Hooks,Self Tapping,10 Pack, M6 CN07
Feature
- WORK FOR TURNBUCKLE—match well with Forged Galvanized Steel Jaw and Jaw Turnbuckle.
- HIGH QUALITY— make of 316 stainless steel, anti-rust, and water resistant, good for outdoor project.
- LONGER THREAD LENGTH—overall Length =2.83″, Thread Length =1.5”, Hole Dimension = 0.27″
- longer length makes it more secure.
- GOOD-LOOKING EYE TERMINAL- nice surface with a fixed installation.
9. (Lot of 50) || CAPLUGS || Assorted "10 Each" ( 1/4", 3/8", 1/2",3/4", 1") Flush Mount Black Hole PANEL PLUGS for Auto Body and Sheet Metal | Furniture Decor | by SBD
Description
50 plugs in each order 10 of each size 1/4” 3/8” 1/2” 3/4” 1” These plugs are a few thousandth over sized so they snap through sheet metal or thin plastic up to 18GA steel or 2mm thick if you are using these in a thicker material you will need to secure them with a 3 M panel adhesive or silicone of some sort. The sizes listed are the hole sizes they are meant to fill.
10. General Tools 313038 3/8-Inch Flat Head Plugs, FSC Ethically Sourced Oak, 50-Pack
Feature
- Fills screw holes- ideal for filling in unsightly screw holes
- Flush finish- When fully seated, The plugs form a flush finish
- Fits securely- slightly tapered plug body ensures a tight secure fit and can be installed easily with wood glue
- Paint or stain- for a perfect wood-color match or for accentuated contrast
- Fusc ethically sourced Oak- wood grain runs in the direction of the plug width for best match
Description
When General Tools 313038 3/8 in. Oak Flat Head Plugs are glued into screw holes, they create a flush, smooth finish. Flat head plugs are ideal for filling in unsightly screw holes and can be used in a variety of craft, woodworking and furniture projects. The slightly tapered plug body ensures a tight secure fit. Wood grain runs in the direction of the plug width for best match. Paint or stain for a perfect wood-color match or for accentuated contrast. As an FSC (Forest Stewardship Council), certified company, General’s Wood Joining Program includes wood based products that are manufactured in accordance with FSC standards. The FSC is an independent, non-governmental, not-for-profit organization established to promote the responsible management of the world’s forests and is nationally represented in more than 50 countries around the world. GENERAL TOOLS – THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1, 000 tools, we’re proud to provide tradesmen, craftsmen and Dyers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
Conclusion
By our suggestions above, we hope that you can found Hillman Hurricane Bolt Hole Plugs for you.Please don’t forget to share your experience by comment in this post. Thank you!
