Top 10 Heatshield Lava Hp

Heat Shield Auto Heat Sleeve
Specifications:
Dimension:
Heat Sleeve Fiberglass Adjustable Heat Shield 10FT-20MM(3/4″)
Material:fiber glass
Color:Black
Warning:
1.Keep it away from the open fire ! Capable of reducing up to 60 percentage of radiant heat.
2.When you install it,please wear long sleeve clothes to avoid skin irritation.
3.Wash your eyes with cold water if you feel the eyes irritation.

The Heatshield Armor, which can reduce radiant heat from your exhaust pipes by up to 70 percent! The outer armor of Heatshield Armor is resistant to the elements, giving the shield a long life. We use either a 1/4-inch or 1/2-inch BioCool thermal barrier inner pad, bonded to a heavy-duty foil outer layer using a proprietary process. This makes it capable of withstanding 1,800 degrees F continuously, which allows this Heatshield to be placed directly on exhaust systems, turbo manifolds, downpipes and diesel particulate filters (check with state regulations regarding usage on DPF). BioCool is a non-caustic, non-flammable thermal barrier. It does not cause itching and won’t smoke or smell the first time it is heat-cycled. This makes it a far superior insulator compared to the clamp-on heatshields that allow heat to escape because they are set above the pipe and not directly insulating it. This exhaust heat shield material is flexible, easy to cut (you can use a pair of heavy-duty scissors) and easy to install, and can be cleaned after installation. A distinct Heatshield Armor advantage over an all-alloy exhaust Heatshield conduction with one hot side and one cold side: There is no metal-to-metal contact layer. Heatshield Armor can even be repaired with Heatshield Armor Weld tape. Heatshield Armor is available in two thicknesses: 1/4-inch for most naturally aspirated applications and 1/2-inch for forced-induction and racing applications. Features: Continuous operating temperature of 1100 degrees F, 2000 degrees F intermittent Reduces radiant heat by 70 percent 0.003 inch thick armor layer Can be cleaned after installation Simple installation, install in minutes! The ideal heat shield insulation for your down pipe, DPF, or high performance application Size: 0.50 inch Thick, 1 Inches Wide x 2 Foot Long Operational Temperature: 1100 Degrees F Peak Temperature (30 seconds or less): 2000 Degrees F Color: Silver/Aluminum

Features:

     ????Materials: Porcelain Steel

     ????Size: 15 x 3 13/16 Inch

     ????Package includes: Porcelain Steel barbeque heat plates x 4

Replacement for:

     【Fits Backyard Grill Models】GBC1460W, GBC1461W, BY13-101-001-12, BY15-101-001-02, BY14-101-001-02, BY14-101-001-04, BY13-101-001-13, GBC1449WBS-C, GBC1449W-C, BY14-101-001-099, GBC1255W, BY12-084-029-98, GBC1355W-C, GBC1440WRSB-C, GBC1449-C, GBC1449WRS-C, GBC1462W-C, GBC1555W-C, GBC1562W-C

     【Fits Dyna-Glo Grill Models】DGF510SBP, DGF510SSP, DGF493BNP, DGB494SPB, DGF510SSP-D

     【Fits Uniflame Grill Models】GBC1059WB, GBC1059WE-C, GBC1069WB-C, GBC1143W-C, GBC1343WP-U, GBC1059WB-C

     【Fits Better Homes & Gardens Grill Models】GBC1562W, BH14-101-099-01, BH15-101-099-02, BH13-101-099-01, BH14-101-099-06, GBC1362W

     【Fits Outdoor Gourmet Grill Models】FSOGBG1106, FSOGBG1107, GR2205501-OG-00, GR2215101-OG-00.

     【Fits Montana Grill Models】129639, KS12007

     【Fits Tera Gear Grill Models】BG1686B5

     【Fits Phoenix Grill Models】 KS10002

Notes:

    ????The listed models are just for reference, please double measure the size of your original parts and compare with ours before ordering.

    ????Please remember we offer 100% exchange and refund service. If you are not happy with the heat plate for any reason, simply contact us. Thank you!

Try Their volcanic rock heat shield mat. Don’t be tricked by the “fool’s gold”, Lava Mat outperforms that gold foil vinyl sticker stuff by reflecting 60 percent more radiant heat. Made from crushed volcanic rock, Their Lava Mat has similar benefits as Their HP Heatshield Mat with that trick carbon fiber look. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood. The Lava Mat can also be laid on a fire wall to shield radiant heat and give your vehicle that trick carbon fiber look. The Lava Mat withstands 1200F direct continuous and 1800F intermittent. This heat shield barrier cloth, can be used with less than 1″ of airspace, 3/8″ minimum is recommended. Bulk rolls of basalt heat shield cloth are available.

***PLEASE MAKE SURE YOU ARE ORDERING SHEATHING FOR THE DIAMETER YOU NEED OR SMALLER.***

USING THIS ON SOMETHING THAT IS LARGER DIAMETER THAN WHAT IT IS DESCRIBED TO FIT WILL CAUSE IT TO SPLIT APART ON THE ENDS AND YOU WON’T BE HAPPY…

 
Thermal Zero lava sheathing picks up where our regular aluminized sheathing left off in terms of heat protection. The lava sheathing is capable of handling extreme heat because of its pulverized lava rock composition. The sheathing itself can easily handle 3000°F radiant heat making it the most heat resistant and durable sheathing we offer.

Available in a variety of internal diameters: 1/2″, 3/4″, 1″, 1.5″, 2″ Thermal Zero protective LAVA Aluminized Heat Sheathing can be used for a large variety of purposes. Fuel lines, electrical wiring, oil lines and spark plug cables are just a few common uses.

Our lava aluminized sheathing is made in 36 inch lengths and come in a variety of inside diameters. The sheathing is made from a high grade aluminum bonded pulverized lava rock mat.

The HP Lava turbo heat shields were designed for and tested on the most hardcore racing applications. Lava Turbo Heat Shield reduces turbo lag while protecting other engine components and reducing under hood temperatures. The turbo heat shields are custom fit and use extreme temperature materials to keep heat in the hot side of the turbo where it belongs. The Lava Turbo Shield has a rugged outer layer of Their Lava Mat that is 25 percent stronger than comparable fiberglass shields, giving them a longer life span. The silica contact layer and silica insulation, make the turbo shield capable of withstanding 1800F continuously. The custom fit design means you do not have to trim or fit the heat shield blanket to fit your turbo housings making installation a snap.

The HP Lava turbo heat shields were designed for and tested on the most hardcore racing applications. Lava Turbo Heat Shield reduces turbo lag while protecting other engine components and reducing under hood temperatures. The turbo heat shields are custom fit and use extreme temperature materials to keep heat in the hot side of the turbo where it belongs. The Lava Turbo Shield has a rugged outer layer of Their Lava Mat that is 25 percent stronger than comparable fiberglass shields, giving them a longer life span. The silica contact layer and silica insulation, make the turbo shield capable of withstanding 1800F continuously. The custom fit design means you do not have to trim or fit the heat shield blanket to fit your turbo housings making installation a snap.

” DESCRIPTION：
Length：71.65”Width：3.94” Wrap Material Aluminized Backed Thermal Fiber
Wrap Color White underside Temperature Rating (degrees F) 500 Direct, wiring, braided hoses etc

FEATURES POWERFUL:
The Thermal Zero Aluminized Heat Sheath
will help to keep what needs to stay cool, cool or the opposite.
On one side we use the same thermal fiber material we use in out heat wrap
and the flexible aluminum shielding material on the other side.

SUPERB CRAFTSMANSHIP
Our heat sheaths are designed and produced right here in the USA.
We double stitch the seam and even finish the edge of the seam
so it will NOT look ugly and fray in your engine bay.
The Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing.

EASY INSTALLATION
With the added convenience of a hook & loop closure design along the open edges.
Without the need of removing one end of connected wires, cables and hoses
simply wrap Heat Shroud around whatever needs protection and close the edges.

Package Includes:1x Heat Shield Sleeve

Dimensions: 19 9/16” x 7 1/16”

Made of stainless steel, durable constrction.

Package incluces a single heat plate.

Fits Huntington 6301-24.

Fits Broil-Mate Grill 24025BMT, 24025HNT, 30030BMT, 30030HNT.

Fits Fiesta Grill 16502, 30035, Cook-Rite EL30034, EH30035, EHA2235B401, EHA2240-B402, EHA2240-B404, EHA2240B404, EZA24025B309, EZA24025-B309, EZA24025B405, EZA30030-B, EZA30040B403, EZA34535Z403, EZH30030B405, EZH30035B302, EZH30035B402, EZH30040B301.

Fits Master Forge 30030MSF.

Aftermarket replacement. Please measure the sizes of your original parts BEFORE you order.