888 reviews analysed
1. Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit
Feature
- ????????There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
- ????????Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
- ????????By setting the temperature set-point and the difference between the temperature set-point and the difference.
- ????????Alarm when temperature is out of limit or sensor is wrong.
- ????????Switch between refrigeration and heating modes, temperature calibration.
2. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
3. Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing, Aquarium, Breeding, Reptiles, Hatching, Heat Mat
Feature
- ????????[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- ????????[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- ????????[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- ????????[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- ????????[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
4. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
5. MXBAOHENG SF-102 Electronic Temperature Controller Digital Display Freezer Thermostat 110V
Description
The product usually takes 7–13 business days to arrive to your hand after your order is confirmed
Model: digital thermostat (frozen) SF-102
Measuring temperature display range: -45 ~ 45°C
Measurement accuracy: ±1 °C
Overall dimensions (mm): 77mm (length) x 35mm (width) x 60mm (D)
E1 Lowest temperature: -45°C ~ control the temperature,the factory value of -35°C;
E2 Highest temperature: control temperature~45 °C, the factory value of 20 °C;
E3 Temperature return difference: 1 ~ 10 °C, the factory value of 4 °C;
E4 Delay start-up time from 0 ~ 10minutes,the factory value of 2 minutes;
E5 Warehouse temperature probe calibration: -5 ~ 5 °C, the factory value of 0 °C;
E6 Defrost probe calibration:-5 ~ 5 °C, the factory value of 0 °C;
F1 Defrost time: 1~ 60 minutes, the factory value of 20 minutes;
F2 Defrost interval: 1 ~24 hours, the factory value of 6 hours;
F3 Defrost termination temperature: 0 ~20 °C the factory value of 8 °C
F4 Defrost temperature display: 0 = normal warehouse temperature display, 1 = defrost start temperature display
6. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
7. DIGITEN Digital Thermostat Outlet Switch Simple-stage Plug Controller LCD Temperature Control 110V 15A
8. Inkbird Dual Stage Temperature Controller + NTC Sensor, AC 100V – AC 240V. (ITC-308S + 1.97" NTC Probe)
Feature
- ????????[Convenient Design] Support °F/ °C display. Easy to set, PV and SV dual display windows.
- ????????[Dual Relay Output] You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
- ????????[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- ????????[Waterproof Sensor] The temperature controller sensor is stainless and waterproof IP68.
- ????????[Alarm for Safe] Alarm when over-temperature and sensor error. Maximum output load: 1200W(110V).
Description
Features:
– Plug and play design, easy to use.
– Support reading with Centigrade or Fahrenheit unit.
– Temperature calibration.
– Compressor delay protection for refrigeration control.
– High and low temperature alarms are available.
– Over-temperature and sensor fault alarm.
– Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.
Specification:
Temperature Control Range : -50~99°C / -58~210 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308S Temperature Controller
1x 1.97″ Female to Male NTC Sensor
1x Manual
9. Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat
Feature
- ????????【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.
- ????????【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.
- ????????【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.
- ????????【Safety】The controller with overload protection has adopted high quality metal case and aluminum cooling plate, 6.5’ power cord and 2 prong plugs to ensure the safety of your electrical appliances.
- ????????【Working environmental temperature】-10～55ºC/14～131ºF（not freezing or condensation state）
10. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Conclusion
By our suggestions above, we hope that you can found Heating Bulb Type Temperature Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
