Top 9 External Ssd Desktop Drive Reader

The Sabrent EC-DFLT SATA Lay-Flat Docking Station supports the direct insertion of Desktop 2.5″/3.5″ SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!

Features:

The Sabrent SATA Hard Drive Docking Station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5"/3.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly with plug and play mounting. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.

To use Hard Drive Offline Clone Function:
1. Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
2. Make sure that the USB cable is disconnected from your computer.
3. Connect power supply and switch on power.
4. Hold down the CLONE button, release when you see a Blue LED.
5. Then quickly press the CLONE Button.
6. A Blue LED will flash on 25% indicating that the cloning process has begun.
7. The cloning process is complete when ALL the lights turn solid Blue (25%-100%).
8. Finally press the power switch to the OFF position and eject your drives.

System requirements:
• Windows
• MAC: OS

Package Contents:
• Docking Station
• Power Supply
• USB 3.0 cable
• User Manu

WEme USB 3.0 to SATA adapter allows you to connect any 2.5 or 3.5 SATA drive to your computer for faster data transferring. For back up, move or archive your laptop or computer’s HDD files quickly and easily, such as iMac, Macbook Air, Microsoft Surface Pro, ultrabooks and so on.

Super-fast USB 3.0 data transfer rates ensure file transfers speeds up to 5Gbps in minimal time. SATA III transfer rate up to 6Gbps.

Specification:
Output interface: USB 3.0/2.0/1.1
Power input: 100-240V, 50/60Hz
Output: DC 12V/2A
Power Cable Length: 1.5Meters
USB Cable Length: 1.2 Meters
LED Lights indicates Power and Activity Status.

HDD Compatible: All 2.5″ / 3.5″, 9.5mm / 12.5mm SATA-I, SATA-II, SATA-III / SSD. Perfectly compatible with HDD from Seagate/ WD / HGST etc, and SSD from Intel/ Samsung/ Toshiba/ Jmicron etc. Max capacity up to 16TB.

System Compatibility: Windows, MacOS, Linux OS.

Packing Contents:
– 1 x USB 3.0 to SATA Adapter Cable
– 1 x USB 3.0 Micro B male to A male cable
– 1 x 12V2A Power Adapter

Note:
– When connect the3.5 inch HDD/SDD, please make sure to power the product with the provided AC power adapter to ensure a stable operation.
– This hard drive reader is for SATA hard drives (2.5″ 3.5″ HHD SSD), CAN’T read IDE hard drives.

Questions:
Q: PC prompts that the USB Device Not Recognized?
A: Please try with another computer or usb device. Unplug&plug the USB cable or restart the PC.
Q: The hard drive does not show up under Windows Explorer?
A: Go to Disk management, right-click the ‘Unallocated’ or ‘Free space’ and select the New Simple Volume option. Then assign the drive letter for the disk.

RSHTECH Dual Bay SATA Hard Drive Docking Station equips 4-in-1 function, including storage, clone, USB hub, and Card reader.
Supports UASP protocol:
UASP (USB Attached SCSI Protocol): supports for HDD/SSD faster transfer performance, 70% faster than traditional USB 3.0, requires UASP capable host controller and operating system. (Real-world performance depends on the disk drive and host system.)
Supports up to 2x 12TB hard drive：
USB 3.0 dual-bay Hard Drive Docking Stations can access both disks simultaneously. Maximum Capacity of 2x 12TB.
Offline Clone Function:
-Ensure the Power Switch on the rear is in the OFF Position and plugged in properly.
-Insert Both hard drives and identify Source Disk and Target Disk (Make sure the memory capacity of B drive is larger/equal than A drive )
– Make sure that the USB cable is disconnected from any computer during the cloning.
– Press the “Clone” button for 3 seconds until the LED starts to flash and the cloning process begins.
-Progress indicator with LED: 25% – 50% – 75%-100%. When offline clone operation is fully completed, all LEDs will constant on.
Note:
-The offline clone function cannot be processed if there are bad sectors or tracks on the hard disk.
– Do not try to remove your HDD or SSD device while it is active. Please power off the docking station before removing.
-Please backup files in the target hard drive before cloning. Any files in the target hard drive will be overwritten when offline cloning occurs.
– If you are mounting a drive which larger than 2TB, please initialize with Partition Style GPT.
-If there is no USB 3.0 port in the front of the desktop computer, it is recommended to connect the 3.5″ hard drive enclosure to the rear USB 3.0 port to achieve the best transmission speed.