The Best Electric Cooling Radiator Fans

Brand new radiator cooling fan blade for universal use. It is good for stock cooling, perfect for turbo applications. Easy direct installation, require no modification. Instruction is not included. Professional installation is highly recommended.

TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.

Specs below are for EACH fan:

6 Inch

Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 7.5″ x 6.75″ x 2.5″ center thickness & 1.5″ edge thickness

6 Inch (w/ Shroud)

Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8″ x 6.5″ x 2.5″ center thickness & 1.25″ edge thickness

7 Inch

Motor Size – 80 Watt
CFM Rating – 800
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8.5″ x 7.75″ x 2.5″ center thickness & 1.5″ edge thickness

9 Inch

Motor Size – 80 Watt
CFM Rating – 850
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 9.75″ x 9.75″ x 2.5″ center thickness & 1.5″ edge thickness

10 Inch

Motor Size – 80 Watt
CFM Rating – 900
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 11.5″ x 10.75″ x 2.5″ center thickness & 1.5″ edge thickness

12 Inch

Motor Size – 80 Watt
CFM Rating – 1400
RPM Rating – 2250
Amp Draw – 10 Amps
Dimensions – 12.5″ x 11.75″ x 2.5″ center thickness & 2.5″ edge thickness

14 Inch

Motor Size – 90 Watt
CFM Rating – 2500
RPM Rating – 2100
Amp Draw – 12 Amps
Dimensions – 15″ x 14″ x 2.5″ center thickness & 1.5″ edge thickness

16 Inch

Motor Size – 120 Watt
CFM Rating – 3000
RPM Rating – 2050
Amp Draw – 14 Amps
Dimensions – 16.5″ x 15.75″ x 3″ center thickness & 1.5″ edge thickness

Adjustable fan thermostat kit for any automotive vehicle. Probe measures liquid or contact temperature and sends power to the fan. Flexible turn-on/turn-off temperature control range of 32-248’F (0-120’C). Thermostat can be wired as a normally closed or normally open circuit.Turn-off temperature is always 15 degrees less than turn-on. Thermostat dial has both Celsius and Fahrenheit temperature markings. Probe is mounted in between radiator fins / inside water inlet.

he UPGR8 electric slim fan is lightweight, has an ultra slim design so the fan can be installed flush against your radiator, or other applications. It comes with the universal fan mounting kit which make it easy to install. The fan can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup. We have size 7″, 9″, 10″, 12″, 14″, 16″, and different colors to choose from.

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Dual automotive 12″ inch reversible 12 volt electric cooling fans. Powerful motors will keep your engine cool. Configured as air pullers out of the box. Blade and wiring can be reversed to make the fans air pushers. For radiators, oil coolers, transmission coolers, condensers and more. Includes mounting feet attachments and tie strap kits. Specs Per Fan: Blade Size – 12 Inch Blade Type – Curved Motor Size – 90 Watts CFM Rating – 2000 RPM Rating Amp Draw – 1400 – 10 Amps Material – Plastic Shroud/Steel Motor Dimensions – 12.5″ x 11.75″ x 2.5″ thickness at center x 2.5″ thickness at edge Thermostat Kit: Universal fit for any automotive vehicle. Designed to activate up to (2) 12 volt fans. Water jacket NPT thread-in probe. Probe typically threads into radiator, water outlet or manifold. Maximum 25 amp continuous draw. AC/Manual override circuit. Installation instructions included. Kit Includes: (1) – Thermostat Switch (1) – NPT Thread-in Probe (1) – Wiring Harness (1) – 60 Amp Relay (1) – 30 Amp Fuse (1) – Large Ring Terminal (3) – Small Ring Terminals (2) – Butt Connectors (4) – 4” Wire Ties (2) – Female Connectors (4) – Sheet Metal Screws (2) – Wire Tap Connectors
Universal fit for Alfa Romeo Aston Martin Audi Bentley Benz BMW Cadillac Chevrolet Chrysler Citroen Corvette Daewoo Datsun Dodge Ferrari Fiat Ford Honda Hummer Hyundai Jaguar Jeep KIA Land Rover Lexus Lincoln Lotus Maserati Mazda McLaren Mercedes Mercedes-Benz Mini Mitsubishi Nissan Pontiac Porsche RAM Rolls-Royce Rover Saab Smart Subaru Suzuki Toyota Volkswagen Volvo Mercury 262 265 267 283 302 305 307 327 350 366 396 400 402 427 454 239 260 272 289 292 312 330 332 351 352 360 361 383 390 391 406 410 428 429 430 460 462 170 225 273 318 340 413 426 440

The Flex-a-lite Trimline fan, when used as a primary fan, can free up wasted horsepower and increase gas mileage by eliminating the drag of the stock belt fan. When used as an auxiliary fan or pusher, this unit can provide additional cooling for air conditioning, or in an engine prone to overheating.

Just like other major components in the car, the radiator cannot work on its own. It has supporting parts that help it perform its function more efficiently. In order for the radiator to reduce temperature of the water and coolant mixture that goes through the engine, it needs airflow that absorbs the heat and assists evaporation. Radiator fans are used to draw the air towards the radiator and help in the cooling process.

High Performance radiator fans may be used to replace your OE product for more efficient cooling. They allow more air to circulate around the radiator and they need less horsepower to operate too, making them ideal for your radiator fan replacement. Radiator Fans come with ultra slim design so the fan can be installed easily against your radiator, in the most convenient position to allow for more leniencies for other aftermarket parts.

Package Included:

TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.

Take full control of your electric cooling fan with the Mishimoto Adjustable Fan Controller Kit! This kit is applicable for any 12v electric fan and includes all necessary components for installation. This kit can be purchased with a probe-style temperature sensor or with a 1/8″ NPT thread-in sensor to fit the needs of any project. The Mishimoto Fan Controller features adjustable activation from 150 degrees Fahrenheit to 240 degrees Fahrenheit and deactivates once temperatures are reduced by 10 degrees Fahrenheit. This controller includes a built-in A/C override feature and is designed for use with 1-2 electric fans drawing a combined 25 amps or less. The Mishimoto Adjustable Fan Controller Kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.