The Best Dv48h7400ewa2 Heating Chamber

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC47-00019A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5: Remove assembly and replace the DC47-00019A heating element. To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

DC97-14486A Complete Heater Element Assembly. Includes heater casing, heater element, thermostat, and high limit. * The hi-limit which is included has been removed and placed in a protected bag for shipping protections against damages. The hi-limit will need to be reattached once you receive the package. The reason for this has been bent spades and damages of the hi-limit from past shipments. *This is not a Whirlpool and/or a Samsung OEM product. The Whirlpool and/or a Samsung brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool and/or a Samsung brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Product description

Stiebel Eltron Tempra 24 Plus Electric Tankless Water Heater, 208/240 Volts The Tempra Plus is the most technologically advanced tankless water heater available on the market today. The Tempra series has been redesigned completely inside and out – upgraded heavy-duty electronics, a simple single flow sensor design, a hinged cover for easy access, and Advanced Flow Control for the Tempra Plus. Welcome to the next generation of German quality. The Stiebel Eltron Tempra 24 Plus Electric Tankless Water Heater is designed to replace a conventional tank with no inconvenience to the users hot water needs. The water heater reduces the eletric bill and saves energy on average of 15%-20% kWH compared to a conventional tank water heater. With the dial at the users fingertips the hot water temperature can be adjusted at anytime, and the unit takes up much less space than a tank water heater. The Tempra has several advantages over a gas-type tankless water heater. Compared to many similar gas tankless models the Tempra is less expensive to purchase. Installation is also much simpler and cheaper since it is not necessary to vent a Tempra to the outside. Stiebel Eltron Tempra 24 Plus Electric Tankless Water Heater, 208/240 Volts Specifications: Voltage: 240 Wattage: 24 Amperage: 2×50 Min. required circuit breaker size: double pole 2×60 Recommended wire size: 2 x 6 Maximum temp. increase: 92 Weight: 15.4 Width: 16 5/8 Height: 14 1/2 Depth: 4 5/8 Working pressure: 150 PSI

From the Manufacturer

The Tempra® Plus is the most technologically advanced tankless water heater available on the market today. Advanced Flow Control is exclusive to the Tempra® Plus and ensures a constant temperature output no matter how great the hot water demand is. Advanced Flow Control technology works by automatically adjusting the flow of water to eliminate unpleasant temperature fluctuation. What that means to you is a consistently satisfying experience every time, all the time !