Top 10 Dishwasher Chopper Blade

Chopper blade assembly. Compatible with KitchenAid, Whirlpool, and a few other brands. This is not a Whirlpool OEM product. The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

SPECIFICATIONS
This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You may need to replace this part if your dishes are not being cleaned properly, your appliance is particularly noisy, or you are noticing draining problems. The tools you will need to make this repair include a number 20 and a number 15 torque screwdriver, a small flat blade screwdriver, and a pair of needle nose pliers.

Replaces part numbers:
8268383, W10083957, W10083957VP, WP8268383, WP8268383VP.

Works with most top name brands:
KitchenAid, Kenmore, Whirlpool, Maytag, Amana, Estate, Magic Chef, Jenn-Air, Inglis, Crosley, Roper

Fixes the following symptoms:
Not cleaning dishes properly
Noisy
Not draining
Will Not Start

Count on our W10083957V Dishwasher Chopper Blade for an unrivaled mix of durability, convenient functionality, and great value for money. Save your time and money now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

PARTS NUMBER：
???? -W10083957V Dishwasher Chopper Blade.

Fixes Symptoms:
???? -(1)Not cleaning dishes properly
???? -(2)Noisy
???? -(3)Not draining
???? -(4)Will Not Start

◕‿◕ 100% money back guarantee – If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions! If you have any problems please kindly contact us by logging in your Amazon Buyer Account > Click Your Account > your order > Find your order and click Contact Seller we will respond you in one business day .

Easy to install by yourself after check some videos on Youtube, an inexpensive way to fix or repair your dishwasher, practical and affordable.

This is a compatible spare part, the brands’ names and part numbers have been mentioned above for reference purposes only.

Product Description

This is a genuine replacement part. The model number and name for the following item is: Whirlpool W10083957 Food Chopper Assembly

From the Manufacturer

Whirlpool W10083957 Chopper Assembly for Dishwasher. Works with the following models: Maytag ADB1400AWB0, Maytag ADB1400AWD0, Maytag ADB1400AWQ0, Maytag ADB1600AWB1, Maytag ADB1600AWB0, Maytag ADB1400AWW0, Maytag ADB1400AWS0. Genuine Replacement Part.

This is a very easy fix. Follow the steps below and this repair can be done in 10 minutes.

1. Tools – T15 and T20 drivers, needle nose pliers, a Philips screwdriver, and a thin flat blade screwdriver

2. Keep track of the order of the removal of all the parts. Start by removing the dish baskets (and don’t lose the clips for the upper basket).

3. Remove the lower spray arm. Hold the plastic support bracket and then turn the arm opposite.

4. Remove the two screws from water feed tube. There’s one on the top and one on the bottom. Tip, do not remove the screws completely. Only loosen enough to remove the tube.

5. Turn the tube with the lower cap clockwise, unlock from the “accumulator.” You may have to slightly bend the tube and lower cap assembly as you turn it.

6. Remove the support bracket and DON’T LOOSE THE NYLON washer. This is listed as the “bearing” in the parts list.

7. Remove the Torx screws from the accumulator and lift it straight up.

8. There are two more Torx screws to remove. One that houses protector and the other that holds the cover over the chopper.

9. This next step is a little tricky. Using a thin blade screwdriver, depress the clip on the right side of the cover to remove.

10. Remove the chopper assembly.

11. Clean out all the grooves that the chopper screen will be set in.

12. With a long needle nose pliers, depress the spring and bracket on the chopper and place into the grooves, then release. The brackets on the chopper should lock into the motor assembly.

13. Install the cover. Start by placing the clip on the right side of the cover and place over the chopper screen. It should fit without any gaps over the screen.

14. Reassemble in the reverse order.

Features:
Brand New & High-Quality parts (Not Genuine).
According to the original factory specification.
Strict quality control standards to Build and test.
Perfect match and Good Choice for Direct replacement of original parts.

Specifications:
Item Type: Dishwasher Chopper Blade Part.
Manufacture Part Number: W10083957V 8268383 PS1734917.
Replace Part Number: AP5983779, W10083957, PS11722146, W10083957VP.
Works for brands: KitchenAid, Maytag, Amana, Whirlpool, Kenmore, Jenn-Air.

Package Included:
1pc x Dishwasher Chopper Blade Part

This chopper assembly (part number W10083957V) is for dishwashers.

Use for Chops up leftover food particles to prevent clogging.

Fit Model
Kenmore:665110739120,665110739130,665110739140,665110739190,66513102K900,66513102K901,66513102K902,66513103K900,66513103K901,66513103K902,66513104K900,66513104K901,Whirlpool:7DU1100XTSQ0,7DU1100XTSQ1,7DU1100XTSQ2,7DU1100XTSQ5,7GU2300XTVQ0,7GU2300XTVQ1,7GU2300XTVQ2,7GU2300XTVQ3,7GU2300XTVS2,7GU2455XTSQ0,7GU2455XTSS0,7GU3200XTSS0etc.
Possible Repair Solution For:
Will not drain, clogging, not washing properly, unusual noises.

Wear work gloves to protect your hands when your want replace that.

8268383 Dishwasher Chopper. The chopper chops up the leftover food particles in the dishwasher.Replaces Old Numbers: 8268383, AH11745442, AP6012235, B0050O1JG0, EA11745442, EAP11745442, PI-2EXF-LGQW, PS11745442

Genuine Original Equipment Manufacturer (OEM) parts! This chopper blade (part number DD70-01001A) is for dishwashers. Chopper blade DD70-01001A spins to chop up the leftover food particles in the sump area. Unplug the dishwasher before installing this part. Wear work gloves to protect your hands during this repair. For Samsung.