720 reviews analysed
1. Cooler Master NotePal X-Slim Ultra-Slim Laptop Cooling Pad with 160mm Fan (R9-NBC-XSLI-GP)
Feature
- Mesh surface and 1 fan provide a chill mat for your laptop, Apple Mac BookPro, Ultrabook, notebook or netbook
- High performance 160 mm fan can spinat approximately 1500 RPM
- Heavy duty, yet ultra slim profile is great for gaming laptops
- Cable grooves allow for easy cable management
- Powered by USB cable with pass through so you don’t lose a USB port
- Two different height settings make this a laptop stand that provides excellent comfort
- Supports various sizes including 15 inch and 17 inch laptops
2. Opolar LC05 Laptop Cooler with Vacuum Fan (Rapid Cooling, Auto-Temp Detection, 13 Wind Speed, Unique Clamp Design, Compatible with Cooling Pads)
Feature
- The best cooler to ease heat dissipation in laptops, rapidly reduce both surface and internal temperature by 18 to 50 F degrees in minutes which is far better than cooling pads.
- Designed for laptops with air vents on both sides or rear, ideal for gaming laptops or systems that tax the CPU. Not recommended for macbook or other ultrathin notebooks thinner than 0.4inch.
- Automatic and manual adjustment modes with 13 speeds to manage the airflow and noise
- quiet operation in auto mode and max. noise is less than 60dbm.
- Two-way Installation: Quick installation provides a easy mounting solution, just plug and play
- 3M fixing glue with patented clamping arms, keeps the cooler firmly attached to laptop when moving.
- One Year Replacement Guarantee for product defects and 30 day no hassle return and refund for incompatibility
- friendly customer care provided by Opolar
3. Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
Feature
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
Description
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
4. Home Theater or Computer Cabinet Cooling Fan with Thermostat & Multi-Speed Control
Feature
- This cooling unit is designed to be mounted inside your equipment cabinet or computer desk. It will quietly pull the warm air out of your cabinet and exhaust it out the back or top. It has a high-quality, low-noise 120mm fan, with long-lasting and quiet fluid dynamic bearings.
- The system also includes a rugged, no-maintenance adjustable thermostat. In addition, YOU control the fan speed, using the multi-speed fan controller.
- Recommended speeds: the 120mm fan is rated at 16 db at 2/3 speed, while moving 49 cubic feet of air per minute, and 3/4 speed = 55CFM at 19db. The fan has approximately these specs at other speeds: Full speed = 74CFM at 22db, 1/2 speed = 37CFM at 13db, 1/3 speed = 25CFM at 10db (approximate). With cabinet cooling, slow (and quiet) are the way to go!
- The cooling unit measures 6-1/4 square, by 1-1/2″ deep.
Description
OVERVIEW: This cooling unit is designed to be mounted inside your equipment cabinet or computer desk. It has a high-quality, low-noise 120mm fan, with long-lasting and quiet fluid dynamic bearings.
The system includes an adjustable thermostat, which is mounted on the inside of your cabinet. This rugged mechanical thermostat requires no maintenance or batteries to operate. It has adhesive Velcro pads on the back to make mounting and thermostat access easy.
YOU control the fan speed, using the multispeed fan controller.
THE COOLING SYSTEM INCLUDES: 1 x 120mm cabinet fan unit, 1 x adjustable thermostat, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.
SETUP:The standard system comes set up so that hot air enters the front of the fan unit (as shown with mounting plate and grills), and exits out the back. Regular Buyers: If you need to have the air coming out the front, just let us know and we will ship it that way. Prime Buyers: Since systems are shipped directly from Amazon’s warehouses, we can’t change the fan orientation on request. However, you can easily change the fan orientation later, using the simple instructions in your installation manual.
The system comes with instructions and a mounting template to facilitate installation. It comes completely assembled, with all components installed, wired and ready to go!
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts and labor warranty.
5. Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
Feature
- Premium quiet fan, 40x40x10 mm, 12V, 3-pin Molex, 4500/3700 RPM, max. 17.9 dB(A), >
- 150,000 h MTTF
- Award-winning 40x10mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 12V 4cm fans in 3D printers, DVRs, NAS, switches, routers, other network and storage devices, etc.
- 3-pin 12V FLX version can be run 4500 or 3700 rpm using the supplied Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation
- Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers
6. Noctua NA-SAVP3 chromax.Green Anti-Vibration Pads for Noctua NF-A15 140mm Fans (16-Pack, Green)
Feature
- 16 green anti-vibration pads for up to 2 compatible 14cm or 12cm fans
- Compatible with many popular Noctua fans such as NF-A14, NF-F12 or NF-S12A series (see Noctua.at website for detailed compatibility info)
- Pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems
- Green colour for creating stunning green/black themed builds with Noctua’s chromax or industrialPPC line fans
- Trusted Noctua quality backed up by 6-year manufacturer’s warranty
7. Innovation Cooling Graphite Thermal Pad – Alternative to Thermal Paste/Grease (30 X 30mm)
Feature
- TOP TIER THERMAL PERFORMANCE – The IC graphite pad features a thermal conductivity of 35W/m-k.
- EXTRAORDINARY DURABILITY – This thermal pad features a dry solution that contains no liquids. It will not pump or bake out like regular thermal compounds.
- UNMATCHED TEMPERATURE RANGE – Keeps your CPU safe with a temperature operating range of -200C to 400C. RoHS compliant.
- TAKE THE GUESSWORK OUT – The modular solution means never again having to wonder if you’ve applied too much or too little thermal paste.
- REUSABLE – You’ll never have to worry about buying thermal paste ever again. The graphite thermal pad can be reused on multiple builds with no loss in performance.
Description
IC Graphite Thermal Pad is a thermal interface alternative to thermal paste for CPU’s, GPU’s and Game stations. This product features top tier thermal performance that is uniquely stable across a wide temperature range -200C to +400C and when used long term should last the life of most electronic components. IC Graphite is 100% pure graphite, non toxic this pad is a solid state modular solution no messy applications to clean, no guessing if you have used the proper amount, just place pad and mount sink. Caution: IC Graphite is electrically conductive! Any contact with electrical components when the computer is turned on can permanently damage the components.
8. AC Infinity MULTIFAN S1, Quiet 80mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling
Feature
- Ultra-quiet USB fan designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- Dimensions: 3.2 x 3.2 x 1 in. | Airflow: 26 CFM | Noise: 17 dBA | Bearings: Dual Ball
9. Arctic MX-4 – Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability – 4 Grams (1 Pack)
Feature
- [BETTER THAN LIQUID METAL]: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
- [SAFE APPLICATION]: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards.
- [HIGH DURABILITY]: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years.
- [EASY TO APPLY]: With an ideal consistency, the MX-4 is very easy to use, even for beginners.
- [THERMAL COMPOUND]: Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
Description
Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm
10. GDSTIME Rounter TV Box Cooling Fan with Speed Control, 182CFM Big Airflow Cooling for ASUS GT/RT-AC5300, Router TV Box Cooling Frame
Feature
- Dimensions: 120x120x25mm / 4.7 x 4.7 x 1 in per fan. Totally 245x245x55mm / 9.65in x 9.65in x 2.17in.
- AC powered fan designed to cool various electronics and components.
- The power adapter increases maximum fan speed and enables the fan to be powered through an AC outlet.
- Rated Voltage: DC 12V
- Rated Current: 2.0Amp
- Rated Speed: 2000 RPM
- Air flow: 182.6CFM
- Noise:33.5dBA
- Sleeve bearing have a lifespan of 35,000 hours at 25 degrees and allows the fans to be laid flat or stand upright.
Conclusion
By our suggestions above, we hope that you can found Laptop Cooling Stand Noctua for you.Please don’t forget to share your experience by comment in this post. Thank you!
