Top 10 Hp Ssd S700 250

HP SSD S700 Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in 3 capacity sizes: 128GB、256GBand 512GB .

The case 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD), and enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs. This design makes it ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet; such as, notebook, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.

features
• High performance

• Low power

• Increased system responsiveness

• High reliability

• Small form-factor

• Minimum weight

• Enhanced ruggedness

HP SSD S700 Pro Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in 3 capacity sizes: 128GB、256GBand 512GB .

The case 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD), and enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs. This design makes it ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet; such as, notebook, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.

features
• High performance

• Low power

• Increased system responsiveness

• High reliability

• Small form-factor

• Minimum weight

• Enhanced ruggedness

Product Specifications:

Capacity
250GB

Components
3D TLC NAND Flash

Read and Write IOPS
Random 4 KB reads: Up to 55 K IOPS
Random 4 KB writes: Up to 80 K IOPS

Bandwidth Performance
Sustained sequential read: Up to 555 MB/s
Sustained sequential write: Up to 515MB/s

SATA 1.5 Gb/s ,3 Gb/s and 6 Gb/s interface
ATA/ATAPI-7
SSD-enhanced S.M.A.R.T. ATA feature
Native Command Queuing (NCQ) command set
Data set management command Trim attribute

Form Factor
Full-sized 2.5inch SSD

Power Management
5 V 2.5inch SSD power supply
2.5inch SSD interface power management

Power (Mobile Mark 2007 Workload)
Idle:340 mW(TYP)
max: 1.38W (TYP)

Temperature
Operating: 0C to 70C
Non-Operating: -40C to 85C

Shock (operating and non-operating)
100 G/6 msec
Vibration(operating and non-operating)
3.1G RMS (2-500 Hz)

Latency
Read: 0.030ms (TYP)
Write: 0.188ms (TYP)

Reliability
Uncorrectable Bit Error Rate (UBER): 1 sector in 10^16bits read
Mean Time Between Failures (MTBF): 2,000,000 hours

Certifications and Declarations
UL
CE
FCC
RoHS

Item Dimension (L inchxW inchxH inch)
4 x 3 x 1

Weight
1.00 lb

Warranty Information
3 years limited

Give your computer a performance boost with the HP S700 SSD. This SATA III SSD is built with premium quality 3D NAND chips, delivering blazing-fast read/write speed that transform your everyday computing experience – the system starts up in seconds, apps launch in a flash, and multitasking is more smooth and responsive than HDD. A suite of advanced technologies is built in, like advanced wearing balancing algorithm for durability, TRIM that maintains performance over usage, and Higher Order LDPC Error Correction for data integrity and security. Plus, the 7mm thickness fits well in laptops and Ultrabooks, and all metal body is strong and acts as heatsink for better stability. New 3D NAND Technology and advanced wear balancing algorithm for higher durability @0.5 Drive Writes Per Day. Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security. Less than 5mW power under device sleep mode for significantly reduced power usage therefore extended battery runtime Manufactured to HP’s high quality standards and fully tested and certified in HP Laboratories

Specifications Mfr Part Number:  2DP98AA#ABC capacity:  250gb form factor:  2.5 inch interface:  sata 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash:  3D TLC latency:  read – 0.026ms; write – 0.223ms performance: Sequential Read speed:  up to 562 mb/s sequential Write speed:  up to 516 mb/s 4K random read  speed:  up to 85K IOPS 4K random write  speed:  up to 90K IOPS MTBF:  2.0 million hours power consumption: idle:  340 mw (typ) Max:  1.38 W (TYP) shock: operating:  100 G/6 msec Non-operating:  100 G/6 msec ‹vibration: operating:  3.1G rms (2-500 Hz) Non-operating:  3.1G rms (2-500 Hz) temperature:  0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness:  ‰¤ 7 mm Dimensions:  100.2 x 69.8 mm Weight:  ‰¤ 80.0 g

Ultra-high Performance without Latency The read and write speed of EX900 reach 2150MB / s and 1815MB / s respectively, which ensures faster speed and higher efficiency. EX900 fully accelerates the PC systems, enabling PC boot, program startup and files loading in seconds. HP PCIe Controller, Better Performance & Stability HP EX900 M. 2 features an HP controller with 4 flash memory channels that support PCIe3x4 and NVMe 1. 3 standard. Maximize gaming notebook and high-end computer & apos; s performance, and increase responsiveness. 3D Nand Flash, Break through Space Limitation HP EX900 M. 2 features an HP controller with 4 flash memory channels that support PCIe3x4 and NVMe 1. 3 standard. Maximize gaming notebook and high-end computer & apos; s performance, and increase responsiveness. Quite Capable of Boosting High-performance PCC With a size of 22x80x2. 4mm (2280), HP EX900 M. 2 is a new storage solution with ultra-high performance. Compatible with new generation motherboard architecture, EX900 is applicable to high-end motherboards, notebooks and desktops with PCIe M. 2 interface. EX900 also supports HP PC DST self-test, ensuring the durability in use. With the performance improved and capacity upgraded, the efficiency of operation and gameplay is also raised. High Stability and Reliability to Improve the Efficiency The Choice for High Efficiency The stable and efficient storage performance of EX900 helps you to operate various related software and work efficiently with half effort. Enjoy the Speed Unleashed EX900 makes the slow loading and latency of computer game to end and enables you to enjoy more wonderful gaming time. CapacityC250GB ModelC2YY43AAABC Interface / Protocol HP SSD EX900 M. 2 2280CPCIe Gen 3(8Gb / s) x 4, NVMe 1. 3 Performance4KB QD32) C Max. Sequential Read (MB / s)C2100 Max. Sequential Write (MB / s)C1300 Max. . . .

Specifications Mfr Part Number:  2DP97AA#ABC capacity:  120gb form factor: 2.5 inch interface: SATA 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash:  3D TLC latency: read – 0.032ms; write – 0.210ms performance: Sequential Read speed:  up to 561 MB/s sequential Write speed:  up to 511 MB/s 4K random read speed: up to 71K IOPS 4K random Write speed: up to 82K IOPS MTBF: 2.0 million hours power consumption: idle:  340 mw (typ) Max: 1.38 W (TYP) shock: operating:  100 G/6 msec Non-operating:  100 G/6 msec ‹vibration: operating:  3.1G rms (2-500 Hz) Non-operating:  3.1G rms (2-500 Hz) temperature:  0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness:  ‰¤ 7 mm Dimensions:  100.2 x 69.8 mm Weight:  ‰¤ 80.0 g

An industry-top-leading Reliability (MTBF) 2M hours, and Endurance (TBW) up to 340 TBWUp to 512MB DRAM Cache for better multi-tasking and durability, Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security.Works on all Windows PC, Full compatibility with HPdst.exe (HP Software Pre-installation Environment). Ideal upgrade for HP PCs

M.2 2280, HP controller offering with 8 flash memory channels that support PCIe 3.0 x4 and NVMe 1.3, sequential read/write speeds up to 3, 200 Mbps/ 1, 800 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 400 TBW, higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security, works on all Windows PC, Full compatibility with HP’s.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs manufactured to HP High quality standards and fully tested and certified in HP laboratories

Model Brand: HP Series: EX900 M.2 model: 2yy44aa#abc device Type: internal Solid State Drive (SSD) used for: consumer Details form factor: M.2 2280 Capacity: 500GB memory components: 3D TLC NAND interface: PCI-Express 3(8gb/s) x4, NVMe 1.3 compliant with PCI-Express 3.1 performance MAX sequential read: up to 2, 100 Mbps Max sequential write: up to 1, 500 Mbps 4KB random read: up to 100, 000 IOPS 4KB random Write: up to 80, 000 IOPS read latency: 0.021ms write latency: 0.029ms MTBF: 2, 000, 000 hours Features High performance low power increased system responsiveness high reliability small Form-Factor minimum weight enhanced ruggedness high data integrity and security environmental power consumption (idle): 0.68W power consumption (active): 3.52W Operating temperature: 0°C +70°C storage Temperature: -40°C +85°C Max shock resistance: 100G/ 6 msec Max vibration resistance: 3.1 grams (2-500 Hz) Dimensions & Weight height: 2.4mm width: 22.00mm Depth: 80.00mm weight: 5.4G. Max. Sequential Read (MB/s) 2100, Max. Sequential Write (MB/s) 1500, Max. Random Read (IOPS) 100K and Max .Random Write (IOPS) 80K.