The Newport Vessels Dana is one of the best performing inflatable sport boats on the market. Designed with 3 independent air tubes, plus an inflatable keel, made from the highest quality 1100D PVC fabric available, heat welded seams, and a marine wood floor; it’s no wonder the Dana is one of the highest rated and best selling tenders on the market. This 8’10” sport boat performs great with up to a 9.9hp outboard motor, and carries up to 3 people. It is capable of 20+ mph with performance handling unseen in other sport boats. When it’s time to head home, simply deflate and pack the boat back into it’s carrying bag, toss it in your trunk, and drive off. The Dana is an incredibly compact, portable and storable boat when deflated for storage. All of our products come with our 30-Day, Float Your Boat Guarantee, so you can buy with confidence! Our boats come with a 2 year manufacturer’s warranty, and we stand behind our products 100%. For complimentary registration documents, contact Newport Vessels with your receipt after purchase to request the documents, mailed same day free of charge. Boat registration laws vary by state, check with your nearest DMV for local regulations.

Coleman Outboard motors are lightweight and very reliable. The 2.6HP four-stroke OHV motor runs quieter and meets EPA and CE standards. It is equipped with a TCI ignition for easy starting along with fan shifting with 360 degree steering. Additional features include: adjustable steering friction, shallow-water drive, vibration reduction, twist grip throttle, and marine aluminum alloy for corrosion protection. Motor Size : 72cc; 4 stroke; water cooled

Product Description

Ideal for a relaxed, low key day on the lake or easy river, the US Coast Guard-approved Intex Mariner 4 has room for four — with two fishing rod holders, if you’d like to try and catch your lunch — and four rapidly inflating chambers. Made of Super-Tough PVC material, the Mariner 4 is durable enough to stand up to years of heavy use, and deflates and packs down quickly for easy transport. The Intex Mariner 4 inflatable boat is constructed for supreme strength and durability with SUPER TOUGH™ PVC. This material is comprised of three separate layers – two outer layers of heavy-gauge PVC laminated to an inner layer of polyester mesh for extra reinforcement. Great for boating or fishing with friends, this roomy Pro Series boat is designed for three adults. Extra reinforcements include a keel rock guard and heavy-duty, extruded plastic flooring for stability and rigidity. Inflating or deflating is a breeze with two Boston valves on the main hull chamber. Fishing and relaxing have never been easier with two built- in fishing rod holders and gear pouch. Motor mount fittings and a battery pouch are included for the flexibility of adding the Intex motor bracket and trolling motor. Two grab handles on each bow and an all-around grab line are provided for your convenience, as well as oar holders and rotational oar locks, a U.S. Coast Guard I.D., and a repair patch kit. Also included are two 54-in aluminum oars and an Intex high-output pump for easy inflation and deflation.

Features

• Four-person raft measures 57 by 19 by 129 inches (W x H x D)
• 880-pound maximum weight limit
• Made of Super-Tough laminated vinyl that resists abrasion, impact, and UV ray damage
• Heavy-duty extruded plastic flooring for comfort and rigidity
• Inflatable keel for improved control and handling
• Quick-fill, fast-deflate Boston valves
• Rotating oar locks and oar holders
• Two fishing rod holders
• Three inflatable seat cushions for comfort and support
• All-around grab line and rock guard
• Grab handle on each end of the boat for easy carrying
• Battery and gear pouches
• Motor mount fitting
• Certified by the National Marine Manufacturer’s Association (NMMA) and U.S. Coast Guard I.D.
• Includes inflatable seats, repair patch kit, 54-inch deluxe aluminum oars, and high-output manual hand pump

Amazon.com

Ideal for a relaxed, low key day on the lake or easy river, the US Coast Guard-approved Intex Mariner 4 has room for four — with two fishing rod holders, if you’d like to try and catch your lunch — and four rapidly inflating chambers. Made of Super-Tough PVC material, the Mariner 4 is durable enough to stand up to years of heavy use, and deflates and packs down quickly for easy transport.

Features

• Four-person raft measures 57 by 19 by 129 inches (W x H x D)
• 880-pound maximum weight limit
• Made of Super-Tough laminated vinyl that resists abrasion, impact, and UV ray damage
• Heavy-duty extruded plastic flooring for comfort and rigidity
• Inflatable keel for improved control and handling
• Quick-fill, fast-deflate Boston valves
• Rotating oar locks and oar holders
• Two fishing rod holders
• Three inflatable seat cushions for comfort and support
• All-around grab line and rock guard
• Grab handle on each end of the boat for easy carrying
• Battery and gear pouches
• Motor mount fitting
• Certified by the National Marine Manufacturer’s Association (NMMA) and U.S. Coast Guard I.D.
• Includes inflatable seats, repair patch kit, 54-inch deluxe aluminum oars, and high-output manual hand pump

Warranty
Intex products include a limited 30-day manufacturer’s warranty against defects in materials and workmanship.

About Intex Recreation
Intex Recreation makes above ground swimming pools, air beds, inflatable toys, pool and lake boats, and the proprietary Intex Saltwater Pool System. The company has been in business for over 40 years, and is a global leader in designing and producing innovative products for indoor and outdoor recreation.

Intex products meet the most stringent safety standards, undergoing intensive testing to ensure years of safety and satisfaction. During the manufacturing process, trained Intex employees continuously monitor a wide range of factors, including quality of raw materials, calibration of the machines, manufacture and assembly of each product, product testing, and careful packaging of every item.

Technical Data:

Overall length: 92CM

Overall width: 36.5cm

Overall height: 22cm

Transom height: 42cm

Full throttle perating range: 4000-5000r/min

Maximum output: 2.5kw(3.5HP)

Speed: 20km/h(four people)

Type: 2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark: 7-1/45-A(inch)

The engine and the propeller ratio: 2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 30:1

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

How to start the engine

(1) Plug the emergency turn-off cable plate in the switch groove.
(2) Plug the oil inlet plug for transferring fuel in the Fuel tank socket.
(3) Plug the oil outlet plug in the tubing socket of motor’s bottom.
(4) Spin and loose the venting screw in the fuel tank cap in a counter clockwise direction.
(5) Extrude the pump a few times until the area is full with fuel and the pump goes hard.
(6) Pull shift handle to neutral position.
(7) Turn throttle handle to “start” .
(8) When the engine cooled,puII out the choke valve to increase the concentration of combustible mixture gas and be more convenient and easier to start.
(9) PuII the starting handle, untiI the initiator of the claw and the flywheel plate mesh.
(10) After the engine runs,idle operate it for 2 to 3 minutes to warm up,then pull all the choke valve to the initial position.
(11) After the engine runs, check cooled water stablely flows or not. If there’s no water or stable flowing, turn off the engine and seek for the reason.
(12) During running, hang up the turn-off rope in your wrist or belt to ensure sailing safety.

Two-stroke outboard engines should use a mixture of two-stroke oil and gasoline.
Under the circumstanceof the same horsepower, 2 stroke is powerful than 4stroke.But the fuel of former is high,and create the noise and it is light weight and low price.
Unlike other traditional land products,our outboard motor are more reliable and stable when it is used and can ensure your safety.

Engine type: Single cylinder, 2 stroke,air-cooled
Engine model: 1E44F-6
Displacement : 52cc
Max. Power: 1.9kw/7500rpm
Bore x stroke 44mm x 34mm
Start system: Recoil start(manual start)
Ignition system: CDI
Mixing ratio(Gasoline:oil) 25:1
Fuel tank capacity: 1.2L
Idle speed: 3000rpm
Guaranteed LwA: 63.6dB(A)
Gear positions: Forward-neutral
Gear ratio: 2.08(27/13)
Propeller diameter: 18cm
Propeller options: 7-1/4*5-A inch

Engine type:Single cylinder, 2 stroke,air-cooled
Professional standards performance，Engine air cooling system
Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
Durable—-Economical and compact structure. Durable, lightweight and anti-corrosive construction.
Quiet Driving—-Works with little noise.,
Suitable for: Freshwater and saltwater

If you have any questions, please contact us.
It is my pleasure to serve you.

Engine and drive flushing kit with integral garden hose attaching coupler. Durable rubber, stainless steel and plastic parts resist corrosion for durability and years of efficient service. Fits 20 hp Mercury and Mariner and higher 2-cycle outboards, 9. 9 hp thorugh 15 hp 4-stroke Mercury BigFoot outboards, 2005 and newer 8 hp through 15 hp 4-stroke outboards, all MerCruiser stern drives (except Bravo One Performance and BlackHawk drives) and Mercury High Performance Torque Master gearcases. Please note: All 2000 and newer V-6 outboards and MerCruiser Bravo Drives with dual water pick-ups also require the Dual Water Pick-Up Flush Seal Kit 881150Q1. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.   Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.   It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

Newport Vessels Polyester inflatable dinghy boat cover with heavy duty 600D Polyester with UV resistant based material provides protection against the suns damaging UV rays. The double stitched and interlocked seams offer excellent durability and will not stretch. The bottom elastic hem allows for proper ventilation to avoid mold growth and build-up. The buckle and strap system allows the inflatable boat cover to fit Newport Vessel’s own various sized boats, as well as most brands and models such as Zodiac, Avon, Achilles, West Marine, Saturn, Mercury, Baltic, etc. Simply tighten the buckles to create the perfect fit. The full rear cut allows for the cover to fit over both the motor and boat. The Newport Vessels inflatable boat cover comes complete with a mesh carrying bag for easy storage and transportation when not in use. A must-have item to protect and prolong the lifespan of your boat if you plan on keeping inflated for an extended period of time.

Pyle Model : PCVFLT16

Marine Boat Cover for Inflatable Boats

Armor Shield Inflatable Boat Cover – Universal Cover for Inflatable Boats (11.5’ – 12.5’ ft.)

Features:

What’s in the Box:

Technical Specifications:

The Pyle Armor Shield Inflatable Boat Cover – Universal Cover for Inflatable Boats (11.5’ – 12.5’ ft.) – Universal Boat Cover Design – Works with Inflatable Boats, Rigid Inflatable Boats (RIBs), Dinghy (Dingey) Boats – Rugged & Heavy-Duty Design for Safe Storage – Elastic Cord All Round for Tight Custom Fit – Waterproof & Weather-Resistant – Quick Release Buckle Fastening – Marine Grade Polyester Fabric, 600D – Mildew Resistant & UV Resistant Protects Against Sun Damage – Double Stitched Seams for Durability – What’s in the Box: – Inflatable Boat Cover – Storage / Travel Bag – Technical Specifications: – Boat Size Compatibility: 11.5’ to 12.5’ Feet (Total Length) – Marine Grade Rated: 600 Denier Canvas – Construction Material: PU Coated Polyester.